Hi Steveo,
Original bin locks the EEPROM unless it finds a tag. On finding the tag the BPROT register remains $00 which permits writing of the config *for that boot only*. This is done less than 64 EClocks into the boot (EClock 36 if I remember right) I have already tested this with the stock bin. Kur4o brings up the ESide... I didn't look at that yet but full of hope.
The three instruction code in the earlier post makes this happen for the '97 code. There might be differences year to year. Again all this needs to be looked at before it can be termed a solution.
It is my hope that the original bin needs no mods.
If you have the time, wade through the code snips I posted. First snip shows the instructions run from EClock 0 through EClock 36. Second is code that is loaded into ram at $0 and run. Not written yet is the code loaded into ram that writes the EEPROM with a loader and modifies the CONFIG. If you find a hole in this please post for me.
-Tom
Bookmarks