How can you or can you delete knock sensors on any bin file when using tunerpro
How can you or can you delete knock sensors on any bin file when using tunerpro
i have had the same question. have you been able to find answers from another source?
there's no one way to do anything with any bin
it depends on the XDF you have available and how the ECM behaves
some ECMs go into a failsafe and subtract x degrees of timing when the knock sensor is disconnected
some ECMs don't subtract that timing when the knock sensor error code is disabled
there's no hard and fast rule so you need to let us know what ecm/mask/os you have
Posting Permissions
Reply With Quote
Bookmarks