Use an L05 BIN to start with and set up the TCC tables for the TH400 kickdown. Can easily copy them from another BIN that supports the kickdown. On our site the end of the Intro to Tuning part 2 page has information on setting this up.
RBob.
Use an L05 BIN to start with and set up the TCC tables for the TH400 kickdown. Can easily copy them from another BIN that supports the kickdown. On our site the end of the Intro to Tuning part 2 page has information on setting this up.
RBob.
Thank you!
So after reading the info you suggested I have a question. For the kickdown to function, I have to wire in a relay to the solenoid? Im just looking for stock shifting so Im not clear about that bit.
thanks
Yes, need a relay. This is the same way that GM did it:
http://dynamicefi.com/EBL_Drawings_Images/3of4.jpg
Which is part of this page:
http://dynamicefi.com/EBL_Drawings.php
RBob.
Ok, thanks for confirming that.
Bookmarks