-
*20141012_121850.jpg*(95.9 KB)*
Attachment*
How does this look
-
*20141012_121850.jpg*(95.9 KB)*Attachment*
-
Sorry im having problems with the pic
-
-
Super Moderator
Originally Posted by
78monte
That looks OK for a starting point, generally an engine at low RPM / light Load will need less fuel than an engine at high RPM / high Load. Engine modifications like aftermarket intake / exhaust systems might change the VE table.
dave w
Last edited by dave w; 10-13-2014 at 02:26 AM.
-
This is after I smoothed then added the addr then smoothed again any suggestions im just trying to get a starting point being I havnt got the new ecm yet or the cables hardware I need
-
-
Super Moderator
Good job on figuring out how to smooth in TunerPro RT. Not everyone gets that far with TunerPro RT. A starting point is just that, a place to start. Collecting a few data logs will be helpful with understanding the VE needs for your engine.
dave w
-
hey guys... Ive been messing around with my tune and found this post. I added the 2 tables together and see im over 100 in some cells. So does this mean I should lower the bpw and check again?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks