A: 16kb
B: 16kb
C: 64kb
D: 0xFF
E: Unchecked
Those settings alone should work. According to the BIN you uploaded earlier, you will then want to click "Browse" on Pos 0, and select the BIN you created with TunerPro. You can then either leave it alone and hit "Stack" as in my screenshot (it will throw an error, but this error can be ignored as it just means it'll fill the chip's empty space with 0xFF), or you can continue to click "Browse" and select the same BIN for Pos 1, 2 and 3 as well. This way instead of filling the empty space with 0xFF, it will fill the empty space by repeating the BIN.
stacker.jpg
Bookmarks