Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22

Thread: 2732 programming with TL866II+ programmer

  1. #16
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Something I found on the net about your other programmer. https://www.eevblog.com/forum/repair...1v-with-tl866/

    I show 2732 to be 25v programming and 2732a to be 21v programming, 27c32 is 12.5v. Maybe the link above will help too. I have multiple eprom programmers and I still use my 2 PocketProgrammers and 2 PocketRoms(emulation) the most with my GM stuff :)
    Last edited by In-Tech; 12-22-2021 at 05:17 PM.
    -Carl

  2. #17
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    Quote Originally Posted by In-Tech View Post
    I can imagine the frustration you feel, it's like de javu of stuff we lived with in the mid 80's while we were learning :(

    If you don't mind, post your 2732(x) .bin file and I will burn to stuff I have here and check. Do you know where the checksum is located in your bin?

    I am quite surprised your 2732a shows a 12.5v programming voltage, maybe china bs? I have never seen that in real life with a 2732a. 2732a's are generally 21v for programming. They can be READ with much less voltage but eproms are very picky about programming voltage.
    I agree, it is surprising to learn 2732b chips require 12.5 volts (actually 12.75), however GM used 2732b chips. GM typically sourced 2732 chips from National Semiconductor / Texas Instruments and Fairchild ( https://deramp.com/downloads/mfe_arc...0NMC27C32B.pdf ).

    dave w

  3. #18
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Quote Originally Posted by Muhve View Post
    Thank you for your reply. I have ordered a new eprom. I uploaded my bin file here, I am not that familiar with coding, thought that someone who does might be able to tell if there is something wrong on the bin itself...
    https://drive.google.com/drive/folde...d0P3d1ORRASfS5

    Walter
    Google drive does not like my winXP lappy, post the 4k 2732 file here, I would like to figure out the checksum. It's not your issue but I am curious.
    -Carl

  4. #19
    Electronic Ignition!
    Join Date
    Feb 2021
    Age
    25
    Posts
    12
    Happy new year!

    Thank you for your reply Carl, I´ve attached my bin file. Unfortunately I don't know where the checksum is located. I have

    I uploaded the original and modified bin to my Google drive:https://drive.google.com/drive/folde...S5?usp=sharing

  5. #20
    Electronic Ignition!
    Join Date
    Feb 2021
    Age
    25
    Posts
    12
    I have used LH2.2 Editor for modifying the fuel map. I would assume that this also recalculates the checksum as necessary? You can find the driver on my Google Drive: https://drive.google.com/drive/folde...d0P3d1ORRASfS5

    Best regards
    Walter

  6. #21
    Electronic Ignition!
    Join Date
    Feb 2021
    Age
    25
    Posts
    12

    Files Attached

    Attached.
    Attached Files Attached Files

  7. #22
    Electronic Ignition!
    Join Date
    Feb 2021
    Age
    25
    Posts
    12

    Attached bin

    Quote Originally Posted by In-Tech View Post
    Google drive does not like my winXP lappy, post the 4k 2732 file here, I would like to figure out the checksum. It's not your issue but I am curious.
    Attached.
    Attached Files Attached Files

Similar Threads

  1. DHP/AVT-852-002 Rev L OBD2 programmer $250
    By SappySE107 in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 02-03-2018, 09:25 AM
  2. 2732 to 29x256 swap
    By mOskit in forum GM EFI Systems
    Replies: 3
    Last Post: 12-08-2016, 04:40 AM
  3. Galep-4 programmer
    By mOskit in forum GM EFI Systems
    Replies: 5
    Last Post: 11-28-2015, 11:51 AM
  4. New Programmer
    By bounder in forum Introductions
    Replies: 1
    Last Post: 08-22-2014, 12:36 AM
  5. new programmer/turbo city bin
    By kunsan1987 in forum GM EFI Systems
    Replies: 2
    Last Post: 06-03-2012, 06:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •