Oh no! another question!!!
I put in a 180 deg thermostat stock is 195 deg I don't want it running that hot are there any changes I'll need to make in the software to compensate?
Type: Posts; User: K1500ss4x4
Oh no! another question!!!
I put in a 180 deg thermostat stock is 195 deg I don't want it running that hot are there any changes I'll need to make in the software to compensate?
Yeah it might be a electro-mechanical thing (like a resistor change) because the tach is definitely still off by at least 500 rpm the redline goes OVER 5000 rpm and the shift points don't seem right...
Cool thanks for that I was worried about using the wrong ratio.
Well i"ve used the idle tables to really bring down the idle in park I'm at 700 in D I'm at 600 awesome!!
Now how do I get my...
Hey EagleMark
How do I find out the rear/front ratio of a bin file if it isn't in the description? my truck has 3.73 gear ratios
After several hours of combing through my current 1994 bin file...
OK OK I deserved that! so where can I find a bin file for a 1995 4l60e that I can add my own 7.4 files to?
Hello everyone!
A quick update on the 454ss4x4 project. I've been driving it for a few days now and it's doing really well brought to a trans shop to double check after he took it out for a test...
Thanks for your reply!
Hey guys
I know this is an EFI website but I thought one of you gearheads out there might have the answer to this question...
When I did the engine swap in my truck, I also put in all new...
Hi Fast355 thanks for the reply!
This had a 4.3Lv6 not a 350 v8 in it
Guess what the flare was? The rear tires breaking loose! I can't keep traction when I get on it! This thing is a beast I'm...
Helllo There!
Guess what the flare was? The rear tires breaking loose! I can't keep traction when I get on it! This thing is a beast I'm going to have to get grippier tires!
It's about 1 yr old bought it knowing I was going to do this transplant worked fine with the v6. The rev limiter didn't work either.
Thanks for that Woods, I was kinda thinking in that direction.:yikes:
Well, I road tested her today and it does shift, but when you get on it, the transmission flares and the engine goes way beyond redline, pegs the tach needle any other ideas out there?
Could this...
Thanks EagleMark I uploaded 2 files 1 at idle mostly the onter with some rpms I know I need a knock sensor and will get it tonight 1 question the v6 has 2 knock sensorsI believe in series the 7.4...
Hey Guys!!!!
Great news She's running great, idle good, data streaming with 7.4 memcal in G1 still have CEL I believe I ran a datalog can I post it somewhere to have someone look at it and...
Hey guys,
Thanks again for all your ideas. I'll let you know how this works. Goodnight.
Hi EagleMark,
Does the LHM use the same mask or is that section of the memcal on a separate system? I'm going to use the 7.4 memcal in my G1 adapter and try one of the bin files I modified from a...
I did that with the 4.3 BIN file, side by side copied and pasted tables and such from one to the other it took me about 4 tries before I felt it was good and many hours of homework. The only thing I...
Thanks everyone for all your help!!!!
Yes JeepsandGuns I do have the chip for the 7.4 I was told NOT to use it because of the mask differences $31 and transmission differences. But I guess I'll...
Yeah that's the problem I'm running into I'm never sure if it's wired correctly and until I'm sure, I can't be sure of anything! BUMMER.
That wiring is for a 1227747 ECM is it the same for all ECM/PCMS
Thanks brian
I'll check that out...That is for a 1227747 ECM is it the same?
Hello EagleMark thanks for the reply!
Yes Dave has been cool he probably was having a bad day.
I changed the fuel pump to the one from the C3500 HD so that's OK I adjusted the lbs per hour to...
Hi dave w
Did you post a copy of that BIN so I could download it?
If I do that doesn't it also change the hex addresses which will also change the wiring of the harness?