I don't really need to have a dual tune, thanks for the offer though.

I couldn't tell if he was rude or just the way he was in email. His products can work for GM stuff, just buyer beware.
The 2Timer product may be the only one that is not directly compatible with 64K...

I'm gonna take this as a lesson to not touch if you don't know. I had enabled the A/C high pressure switch setting in the BIN because I have one wired into the system from the factory, however it...

UGHH Okay, So I swapped valves again and it magically started working?
I followed the instructions in the PDF again but I can't seem to get the pintle to drive out when connecting pins A and B on...

I was playing around with the instructions in the PDF you sent but I couldnt seem to get the IAC to respond. I'm really not sure whats going on here, I check the wiring from the IAC to the PCM and it...

Thanks, I will take a look later this week. Darn school has me too busy this week.

Another question, and possibly for another thread, the datastream definition file used there has a gauge for WBO2...

Figured I should post the Log, Bin, and the definition files if anyone wanted them.

16197427 ECU, $OD 5.7 tune adjusted from BJYL base using XDF and ADX from 16197427 thread on here.
I've just started tuning and been playing around a bit. I'm using the excel document Dave W came up...

Alright update, I bypassed his 2Timer circuitry and wired the A15 pin back to A15 and it programmed fine and ran the vehicle. I am happy now.
Thanks all.

On his website he claims it should work. I asked him about it since the program is larger than the address range he provided. We'll see where it goes, I dont care too much about the dual tuning...

Yeah I probably should go back and read the manual, DUH.
Anyways I actually got in contact with Jamie from BoostedNW, to make it easier I'll just quote his email in here,


So the pin "missing"...

I tried to program it without input any parameters in the Buffer nor the Chip adressing spots. It errored out in the verification step. I uploaded the BIN it spit out when I didn't put in any adress...

No problem! Even if I don't order the part from them, I have found their catalog to be quite extensive and useful for finding parts. I use it quite frequently if I need to find a part number.

Have a 1994 Olds Bravada with the 16197427 ECU, swapped a Rebuilt 350 .040" over with a hotter cam in it. Running TBI right now since the harness was basically a direct swap over.
I bought a BJYL...

I found it here on rockauto, under the Ignition Control Module connectors. If the link doesn't work just go (CHEVROLET > 1994 > C1500 PICKUP > 5.7L V8 > Electrical-Connector > Ignition Control Module...

Not entirely new here but I dont think I actually made a post here like I should have. Just made an account so I could get bin files and definitions.
Working on a 1994 Oldsmobile Bravada that I...