Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: Eds

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Contact steveo on this forum or at :...

    Contact steveo on this forum or at : http://fbodytech.com/

    Sound like you need $EEHack.
  2. Replies
    2
    Views
    161

    Actually quite a bit of power can be had from...

    Actually quite a bit of power can be had from that 3.1L engine if you're willing to rebuild the engine utilizing generation 3 heads, intake and pistons. The 60degv6 hybrid engines when tuned perform...
  3. Replies
    8
    Views
    573

    When reading the installation instructions for...

    When reading the installation instructions for the speedometer, it notes a 8000 ppm vss signal.
  4. Replies
    21
    Views
    1,381

    You say the leak is not being caused by the pipe...

    You say the leak is not being caused by the pipe plug but did not say how you verified that. The adapter is hollow (coolant passage) and pipe plugs are tapered. I am wondering if the plug when...
  5. With Tunerpro try this. ...

    With Tunerpro try this.

    http://www.gearhead-efi.com/Fuel-Injection/showthread.php?356-Enable-data-Tracing-in-TunerPro-How-To!
  6. Replies
    15
    Views
    18,600

    Sticky: (General Release) (March 1, 2019) * Fixed...

    (General Release) (March 1, 2019)

    * Fixed issue that caused values in the ADX listview to show up as dots, or boxes and apostrophes on newer builds of Windows (finally!)
    * In the difference...
  7. I'm wondering when were the good ole days for...

    I'm wondering when were the good ole days for you. From your comments, it appears to be the early 1980's. Prior to the early 1980's and the OEM's dealing with emissions, engines used manifold vacuum...
  8. You may want to review Rockauto again. It has a...

    You may want to review Rockauto again. It has a listing for both sensors differentiated by the manual and automatic transmissions.
  9. Thread: mask question?

    by Eds
    Replies
    7
    Views
    722

    Not so extreme. My Chevy v6 calls for a factory...

    Not so extreme. My Chevy v6 calls for a factory setting of 0.060".
  10. Replies
    3
    Views
    1,139

    I just have to ask, did your 1990 Cutlass Ciera...

    I just have to ask, did your 1990 Cutlass Ciera truly have a 3.1L and not a 3.3L engine? It was my understanding that the 2.8L engine was offered during years 1987 to 1989 and the 3.1L wasn't offered...
  11. Thread: win aldl

    by Eds
    Replies
    10
    Views
    1,752

    Tunerpro V4 uses ADS files whereas TP V5 uses ADX...

    Tunerpro V4 uses ADS files whereas TP V5 uses ADX files.
  12. Thread: wideband logging

    by Eds
    Replies
    68
    Views
    17,129

    What you are trying to do with the A/C pressure...

    What you are trying to do with the A/C pressure sensor has me confused. Normally, the LM-2, 0-5 volt output would be wired directly to the ECM replacing the A/C sensor signal. On your '92 Corvette I...
  13. Replies
    4
    Views
    631

    A quick search on the AutoZone repair guide...

    A quick search on the AutoZone repair guide wiring diagrams show the two circuits. Your assumptions for the location and use of the two component appear to be correct.
  14. I believe A1 is the signal to FP relay and...

    I believe A1 is the signal to FP relay and activates the pump to purge the fuel system prior to engine start. The oil pressure switch is a safety device which maintains power to the fuel pump unless...
  15. Replies
    3
    Views
    709

    You do not say if things to cool down the engine...

    You do not say if things to cool down the engine will re-start or not. If so, before declaring a failing ECM, I would look at the ignition control module. I have experienced a situation where the...
  16. Replies
    34
    Views
    4,055

    The pickup coil is located at the center of the...

    The pickup coil is located at the center of the distributor. The distributor shaft passes thru the center of the coil assembly. The two leads from the coil attach (ie. plug into) the ICM. Unplug the...
  17. Replies
    4
    Views
    1,116

    Try this link to Ludis's schematics: ...

    Try this link to Ludis's schematics:

    https://pcmhacking.net/ludis/
  18. Thread: 1995 lt1 M6 tuning

    by Eds
    Replies
    41
    Views
    10,679

    Look at the wideband controllers sold by...

    Look at the wideband controllers sold by Ecotrons. May be what you are looking for.
    http://www.ecotrons.com/products/accurate_lambda_meter/
  19. You may want to go back to diyautitune and ask...

    You may want to go back to diyautitune and ask for their recommendation. They may have another wheel which better lends itself to your engine application. I would be very reluctant to trust the setup...
  20. Replies
    9
    Views
    1,565

    No where in the know but I did come across this...

    No where in the know but I did come across this thread that may be of some help.

    http://www.gearhead-efi.com/Fuel-Injection/showthread.php?3471-5-7-and-4l80e-trans-unsure-what-bin
  21. Replies
    7
    Views
    1,588

    For $A1, look in Scalars, Fuel, KDISFS in Lb/Hr

    For $A1, look in Scalars, Fuel, KDISFS in Lb/Hr
  22. Replies
    12
    Views
    2,324

    Don't know why but the link did not work for me.

    Don't know why but the link did not work for me.
  23. Replies
    12
    Views
    2,324

    Look at this thread as it should help you get the...

    Look at this thread as it should help you get the wideband connected and working correctly. I used this info when I installed a wideband o2. C 21 is the correct pin to use with the 1227727 ECU. I...
  24. Thread: Another Conversion

    by Eds
    Replies
    93
    Views
    16,573

    Try these guys. They list a 1984 c10 distributor...

    Try these guys. They list a 1984 c10 distributor but not clear if with or without vacuum advance.

    http://search6969.used-auto-parts.biz/cgi-bin/search.cgi
  25. Thread: Another Conversion

    by Eds
    Replies
    93
    Views
    16,573

    I just looked at RockAuto and they show the AC...

    I just looked at RockAuto and they show the AC Delco unit p/n 88864755 available.

    http://www.rockauto.com/en/catalog/chevrolet,1984,c10+pickup,4.1l+250cid+l6,1030903,ignition,distributor,7108
Results 1 to 25 of 56
Page 1 of 3 1 2 3