Fast pumps not in yet I have it here new inn the box and was asking if that one will do and it will.. Thanks

Fast, Thanks for the above post. I have a new Delco EP376 pump Not sure what it is but I’ll look it up. I would think you want a AFR in the 13’s at wide open correct? I got a wide band hooked up and...

[QUOTE=Fast355;68671]A pair of 61 lb/hr TBI injectors are good for 205-210 hp @ 85% duty cycle at the stock 13 psi and if they were static, meaning on all the time, good for about 250 hp at most. ...

I spoke to Ed and he said to set timing at 0* with spout disconnected.. Can’t help but all this is confusing what some are telling me and what others are saying. I’m sure there are way to do this and...

Ed just sent me back my chip with an adjustment and told me that the bored TB I have may be junk. Any way here’s his chip anyone recognize it??12485

Sorry for the confusion guys I sent that post on timing with my phone..Any way I set 0* with the spout disconnected..shut it off and reconnected the spout then started and timing is in the 20* mark...

On the Timing when it’s running idling with spout connected with timing set on zero disconnected it’s running about 20° advanced at idle

Looks like I have some work to do..
Old motor was good no oil issues it was just tired exhaust and converter are good as I had the Y pipe off and converter is clean..
My Timing is set at 0* at...

Looks like a good idea thanks!!

Thanks for that experience with the zif guys. Dktool so what did you use for doing the re-burning?? I was going with APU1 cause it looks like its all there to do what I need to..
I’m still trying to...

Kitch, myburb, So if I get the apu and a GP1 package I should be set to tune this then? Do I also need the ZIF ? What does that do for me? I want to order what I need to do this..
Here’s a pic of...

I think I should get the aup1 auto prom package??

Thanks for that last post.. Ill go over to moats and order a cable and get tuner pro.
I’m not sure what chip ed at fast chips uses but can I with the proper equipment reprogram that chip?

Where to purchase that ALDL to usb cable?? Don’t see it on tuner pro web sight.

What do I need as far as cable to use tuner pro..and I would guess get the RT version?

Also it has a red/blue 6395 ecm as its got a 4l60E trans

Kitch, I had Ed at fast chips do a chip for me that’s piggybacks the original. I sent it back 2 times already as it was rich at cold start and hot restart and cleaned up when it went into closed...

First thank for all the earlier posts I have asked question about!! I have a 383 that was built and I’m thinking its not the power I was expecting. Here’s the build info..
9.5 compression..The shop...