Yes I would be interested in doing it for sure. And yes it is on the serial communications link port.

Thanks :) I do know a guy that has done the lag work and reverse engineered the ecu. I don't think he has much more interest in doing more work on it as he has moved on past his project with it

I don't think the ECU was used in anything else. I can duplicate the funny chip and it will work in the sled without the funny box. I can do some checking to see exactly what the decoder box is. ...

Thanks for the reply. So pretty much whatever company built this encdoded chip went to great measures to do so and most likely spent some good money do it and so it wouldn't be feasable to do it now...

No part numbers or any markings on the decoder. It plugs into the like OBDII port of a car on the sled. So where I would plug in my scan tool. There is only one xdf file for this application. ...

I tried reading the chip with my burn2 using the 27c128 option and was able to get the same readings in the tunerpro program as the bin you sent me showed......

I have attached 3 pictures of the decoder box. I just took the pics. I was hoping it would have worked too :) Would it help if I attached a bin of a stock chip I am able to read so you can see...

Here is a list of the chips the Batronix BX32P I am looking at can handle. It list several 2764 chips. If I got this reader then should I be able to read these 2 chips with no issues? Or is it...

Now all the main fuel map values are 7.97 and the tps values are all 159.4 and the rpm values are all 12750

Hopefully this works

I am useing tunerpro. I am not tech savy enough to know the pins n this n that, sorry :( If I sent you a copy of the bin any chance you might be able to look at it? Or would it even make a...

The stock ecu fuel map is 32k and I did read somewhere that this aftermarket company did first do there fuel chips with 8k and then later on upgraded to 16k or 32k. How does the 2764 chip differ...

right from there website. USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips.

The bins are 32.0 kb of info

I don't see anything that says for a 2764 chip on the burn 2 screen. These are my options: 29C256, 29F040, 27S512, 2732A (READ ONLY), 27C128 (READ ONLY), 27C256 (READ ONLY), 27C512 (READ ONLY),...

It will read the chip however the data is scrambled or something.

The one chip I can't read says the following on it: M2764A-2FI PGM 12.5V4880BST 9815SINGAPOREThe other chip I can't read says:M2764A-2FIPGM 12.5V488AGST 9618SINGAPOREA stock factory ECU chip says...

The stock chips in the ecu were 256 but the 512 chips will work yes as I am using the 512 chips with no issues at all. the stock fuel maps and aftermarket fuel maps are 32.0 kb of info. I have been...

It is a Polaris indy 650 RXL snowmobiles. The ecu on the bottom says Japan electonic control systems co ltd made in japan. I know the scan tool for it is for a subaru car. This is all from the...

I know they used to say you needed to buy there decoder box as they would call it to go along with there chip and plug it into the port where you would plug in a computer to monitor the system or...

I am working on a Snowmobile ECU. I have some aftermarket chips that are protected and which you can't read them. When you do all the values are the same #. I have a ton of chips for my snowmobile...

Hello guys, I am wanting to protect my mapping on my chips so only I can read them and no one else can and or copy my chips. What do I need to do? I am useing the Moates Burn 2 programmer and...