For some reason I get no results when I search with the keyword MSD. I know there are posts that have MSD in them since I posted one myself.
...
Type: Posts; User: WallyCJ7
For some reason I get no results when I search with the keyword MSD. I know there are posts that have MSD in them since I posted one myself.
...
I have an MSD distributor and that just what MSD calls it. I thought I was connecting it just as the MSD installation guide shows I think...
Here the issue I’m having, during cranking the injectors are not firing. If I disconnect the magnetic pickup connector to the MDS box and the injector fire during engine cranking. I can then...
Yes I got it used.
Thanks
What I’m looking to do is install a MSD 6L ignition box. I know there has to be posts on this but the search doesn’t find anything. Strange
What I’m looking for is the info that tells me if I...
Yes I'm in San Diego county
There's a couple of jeep guys hanging out here... I have a 78 with a 401.
I found the problem. I took the chips to the local Dyno shop and they have a burn2. He tried to load my BIN file and has the same results on both chips.
He pulled out one of his chips and the BIN...
Never mind, found one...
I'm having issues flashing my chip and I'm looking for someone close that I can test flash a chip so I know for sure it's my burner or the chips.
Thanks
Wally
No luck side to side... I moved it like 5 times.
Yes 4k and I've tried 256k too
Are you saying side to side or a different set of slots? I'll try side to side.
Notch towards the arm and set furthest away from the arm
Today I trying to work on tuning and I'm thinking the Burn1 is not working.
Start Flash & Burn
27SF512 highlighted
Chip address set to Start: 00F000 End: 00FFFF
Buffer address: start 000000...
I now have the avatar working and here's another shot of mine. It a 78 CJ7 401. T400. Atlas 5:1, Dana 60 4:56's F&R, Detroit in the rear and a ARB in front, Hydro boost brake and hydro assist...
Yes I could smell that it was rich with out the computer. But it wasn't spitting and popping going down the road.
I have the spreadsheet from Eaglemark and I've added a sheet to track the changes...
I finally got a good working ECM - thanks Brian and I went back and tried the .BIN file you adjusted. After a rough startup and after warning up I was able to take it out for some data collecting...
I understand PCM baud rate but why the memcal out of a 7.4L over the 5.7L?
I have the G1 with the ZIF socket ordered so I should be good to go...
You got to love a 1/2 price sale at the junk yard today:rockon:. The 2nd truck I checked already had the glove box removed and I didn't even need any tools to pull it out. I now have the wires to...
Do you need a Moates G1 adaptor to use a 27SF512 chip in a 16197429 PCU?
Can the Eprom be pulled and the 27SF512 chip be installed?
Thanks guys I may take you up on your offer. I find that one pin may not be soldering for some reason - probably dirty. I thought I cleaned everything really good. Now I need to find out how to...
Its a nice older Weller power base and stand, but its non adjustable so I cant tell what wattage it's running.
I went by radio shack and picked up some flux core solder and some de-soldering...
During my attempt at trying to tune my system I started getting communication errors with the laptop. I was thinking it was too high baud rate so I lowered it to 4800 and it still had errors and...
I used asdu9567.bin. Was that the stock one?