Okay after some thought and consideration of time and quality I am leaning towards buying a pre-made wiring harness. I was talking with a sales person and he voiced concerns about tuning with a...

Because I cut the wires short to the ALDL I am going to have to add some wire to be able to mount it. What is the preferred method? Soldering and shrink wrap or unpinning from connector and...

When I removed the wiring harness it had a bulkhead connector, or at least I thought it was. In reality the wires go straight through and are covered by this plastic goop. I heated the goop and it...

Working on the wiring harness and and I am unsure of which wires I need and which I don't. I have two multi-port plugs in the wiring bundle that connects to the wiring bundle inside the vehicle...

Okay, basic question. My Jeep did not come with a check engine light so when I'm wiring in the TBI conversion do I need to wire in some sort of light?

Went to the Junkyard yesterday and pulled what I hope is everything I need to do this conversion. The donor vehicle was 1989 Sierra GMC pickup. The ECM was an 1227747. The BCC is still to be...

Trying to get everything ready to convert my CJ-7 AMC 304 to a TBI using the parts pieces from a GM late 80's early 90's. My question, and I think I already know the answer, is does the donor...

Where is a good mounting point in a CJ-7 for the aldl and the Ecm? I know later Jeeps had the ECM mounted under the dash on the passenger side. They didn't have any ALDL ports.

Thanks That's what I was thinking but was unsure about cutting and reconnectiing

Newbie to forum so please don't flame me for simple questions. When you are salvaging the wiring harness from a donor vehicle do you need to also get the ALDL port? I was reading about what was...

Wanting to learn more about a junkyard TBI on a Jeep CJ-7 with an AMC 304. Lot of good information here