Search:

Type: Posts; User: Mrgto68

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. My apologies for not following up with this...

    My apologies for not following up with this thread.

    Found the issue. Somehow while working on the TBI the vacuum nipple on the EGR Solenoid to the EGR valve broke clean off. After replacing the...
  2. '88 TBI Idle issues and more after new injector install / tune-up.

    Greetings Gearheads,

    I needed to replace the injectors on my '88 R30 350 TBI. I wound up getting a complete rebuild kit and cleaned her up pretty good. The IAC was really gunked up, so I replaced...
  3. Circling back on this, I'm so close.

    Circling back on this, I'm so close.
  4. Hey Dave, Following up on your findings on my...

    Hey Dave,

    Following up on your findings on my last data log.



    The bad VSS reading was a wiring issue, which is now corrected
  5. Ok, so I guess the P/N Switch is also the Neutral...

    Ok, so I guess the P/N Switch is also the Neutral Safety switch.

    "Regarding the P/N switch:
    Some wiring harnesses ground the Park/Neutral wire so that the ECM always thinks the vehicle is in...
  6. Hey Dave, Sorry for the delay, the above post...

    Hey Dave,
    Sorry for the delay, the above post regarding the "Mechanical Noise" is not related to my project, Just another member posting some insight to an issue he had.

    I did relocate the...
  7. This is an automatic, TH400 Transmission

    This is an automatic, TH400 Transmission
  8. Hey Dave, absolutely appreciate your input and...

    Hey Dave, absolutely appreciate your input and help!! Thank you.

    I'm going to do some research on the forums and read up on the SA *Hack* and the PWM *Hack* this is new to me. As per your...
  9. Ok, well it took a little while, but I was able...

    Ok, well it took a little while, but I was able to clean up and remove a lot of the old wiring in the engine compartment that had nothing to do engine operation. I installed the heated O2 Sensor and...
  10. Thanks for this! now need to go read up on the...

    Thanks for this! now need to go read up on the stuff from moates.

    wondering if there are any members that know how to do this stuff in Vegas. nah that would be too easy lol
  11. Good point. This is for a custom off road use...

    Good point. This is for a custom off road use only vehicle. 5 mph average, possible up to 20 mph. It sits at idle 80% of the time it's being use turning two high output Alternators, which is why...
  12. This is good news! What would be the easiest and...

    This is good news! What would be the easiest and most affordable way to accomplish this? I'm an old Carburetor Wrencher, I was able to figure out how to install TunerPro RT and get the ecu to...
  13. ahhh my bad, I thought had uploaded the photo. ....

    ahhh my bad, I thought had uploaded the photo. .

    AHWZ 7639

    13959
  14. 350 TBI - increasing idle setting for AC Switch?

    I'm looking for a way to manually increase the idle setting of my 350 tbi.

    Installed a new engine harness, removed all electronics not necessary to the operation of the motor. One option I'm...
  15. 350 TBI Firewall 12v Junction to Bulkhead connection wires?

    I'm in the process of eliminating a bunch of electrical components that aren't needed in my '88 r30. All of the headlights, Taillights, blower motor, AC etc basically everything that's not vital to...
  16. Thank you for looking into this for me. S.B.?...

    Thank you for looking into this for me. S.B.? is that a member on the forum?
  17. I sent you a private message. Would love to see...

    I sent you a private message. Would love to see if I can get my rig set up with this.
  18. Ok, so you're saying that the Relay I have in...

    Ok, so you're saying that the Relay I have in those photos are in fact the correct wires and relay for the TH400 trans?
  19. Ok, so If I connected 12v to the AC wire from the...

    Ok, so If I connected 12v to the AC wire from the ECM, this in theory should then increase the idle?
    If it does, then I could Mcgyver up a "fast idle" switch by running that AC wire to a switch. ...
  20. Thank you! I'll do some more research on the AC...

    Thank you! I'll do some more research on the AC Signal, I don't want to guess and fry my ecm. ;-)


    AHWZ=
    13826


    XUZA is the name of the rig. :-)
  21. On the new wiring harness there's a wire labeled...

    On the new wiring harness there's a wire labeled AC Pressure which I haven't connected to anything.
    Please forgive me, what do you mean when you say give it a plus signal or minus signal?
  22. Awesome! Thank you BCC: AHWZ 7639 ...

    Awesome! Thank you

    BCC: AHWZ 7639


    Just the few steps that DaveW had me take, ie: 3 wire O2 Sensor etc has the vehicle sounding and running much better at Idle.
  23. [QUOTE=1project2many;74246]I'm sorry, but I seem...

    [QUOTE=1project2many;74246]I'm sorry, but I seem to be having trouble seeing the relay or any of the wires attached to it. Maybe you have a wiring diagram and can match up wire colors?

    Sorry...
  24. Thanks for looking this over for me. I'll run a...

    Thanks for looking this over for me. I'll run a log again, I must have somehow stopped the logging sooner then I thought.
  25. I'm not at the programming stage of my TBI...

    I'm not at the programming stage of my TBI education lol. I'm still trying to figure that all out. the blurry photo had me squinting to see what you have posted. ;-)
Results 1 to 25 of 48
Page 1 of 2 1 2