Something has happened that's keeping my target rpm setting to just displaying the "in gear target". In park and neutral the "idle target" never switches to what is set at. R

I'm assuming its the...

Thx, set Vin then Flashed.

Since I'm running with a few patches from the eehack team what will be the recommendations to flash this reman ecm?
Can I just flash the current tune with all its patches or will I have to start...

That is what's happening but stabbing the peddle dose not update the baro in my case. The only way I can get it to update is key off then key on.

Can't belive that gm would require a family...

I have more findings steveo or anyone with answers... thx

Is 2844 baro press update rpm mean it updates below the setting or above that rpm?

2841 min tps for baro up-date is set at 38%

2842 min tps difference for baro up date is set "0"

Steveo I got the car out for a drive yesterday and the log showed that when I stomp on it the Baro dose not up date. I had to pull over shut the car off and restart it. Then the Baro updated to the...

SteveO
Could you point me towards the name of this warning threshold and I'll take it from there.
Thanks again.
Ps this little 355 LT1 just did a sweet roll race from 40 mph againt a Opitma...

Thanks, I will take a look at the log file when I get home.
Now that you mention the baro update, I belive I've seen a flag setting for that when looking through all of those.
I'm surprised key...

The text field for "MAP" turns red in color when I'm driving high elevation roads. What's this telling me?

Lt1 ee running closed loop

Just wondering if anyone here has come up with an affordable or DYI voltage step down controller along the lines of the Aeromotive 16306 ?
My search of this site came back with zero mentions.

Thanks for your input Steveo. I've felt that once I get the cells in the 20-45 kap logged with actual under load values and not just very light throttle to decal It will all come into line. As far as...

I'm hoping the stock baro settings will be close. A 1bar gm map in the technical info shows they are calibrated from sea level to 15,000 foot.
That testing will resume once they open those mountian...

Yes, my goal is to go back too SD once I get this sorted out from the drastic elevation change. With my move from Michigan to Northern Utah. From 800 foot elevation and now I'm at 4500 foot and have...

Ya, I feel real rookie about now. Its been forever since I've opened WinRAR stuff like windows 98...lol
Any how I've got the speed density AE patch installed into eehack and functioning. Thanks...

Oh, OK.

When I try to unzip the link that ends in (1598039824) I get either of these two error messages.

Share
View
Compressed Folder Tools
Extract Compressed (Zipped) Folders
Cannot...

Thank you !

You mention at that link it is a PNG DOT so I take it it needs to be pointed to which format to work?

Hello kur40
Just doing some reading and came across this topic.
Is this feature in the current revision of eextra v.003.xdf ?

Thanks for the great tool!!!
Jeff

Thanks man

Yes that's the LTCC. When I tailored the factory harness down I did the same with bobs harness and merged both into a single harness. The LTCC box is mounted on the firewall directly behind the...

1789317894

Hi all...
I'm a old LT1 guy from the early days of TTS Mastertune EE then LT1Edit when it released among those early cool tools like original vemaster and bin converter.
My Firehawk has been around...