well got it all running good except it has a surging idle out of gear, in gear it is fine any ideas?

Well i haven't had time to play with the scout but did get to set up a 95 LT1 motor in a 92 camero. The Autoprom worked flawlessly. I also hooked it up to the scout last night it also hooked up...

345ci v8

I have decided to cough up some dough and ordered a Moates autoprom setup. It is supposed to be here on monday. I am hoping that i can spend more time tuning and less time trying to make...

I was told it was not controlling the spark however upon farther investigation i have corrected a wiring error and also noted that it was setup to control the spark but still had mechanical advance...

Thank you Eaglemark. I believe i found my connection stability problem also, I was using a cheap inverter on my laptop.

Well i removed the modification from the socket and made it to the chip itself and now it is working. While i was working on the scout last weekend i discovered that the distributor did not have the...

I guess i had put the wrong prom in the original cause i found another one and it works normal so what could i have done wrong with the 27sf512 chip?

OK I burned the file on to a 27sf512 chip and pop it into my modified ecm that i socketed with the end 2 pins on each side connected to pin 26. I turn on the key and the check engine light just...

Thankyou for the changes i will burn it to a chip and try driving it some more, and record some more data and see how it reacts. By the way it was failing for hi CO and real high HC,

Ok i have the vehicle now it has a stock gm "anlw" bin out of a 1227747 ecm. I have driven it a little bit it is kinda dicey driving it as it has expired tags, it wont pass state emissions test.
I...

So i am totally new at this, the scout has a 1227747 ecm and is using at present a chip with ANLW bin on it.
I pulled the bin file out of the chip and have it saved.
I also have driven it to get a...

Ok i found out from drew tech that the cardaq+ will not work.

Another question could a cardaq+ be used for data logging on a obd1 system?

Ty for the reply!:innocent:

Well i just figured out how to read the chip out of a junk ecm 92 s10 blazer 16144288 ecm and got it and the correct xdf file and was able to read it so hopefully I'm on my way. Had some troubles...

Hey i have access to either a vetronix mastertech scanner or a tech one will tunerpro rt interface with either of them for data logging?

I am going to try and setup some proms to work on a GM throttle body setup added to an older International Harvester Scout. I'm going to be using the ecm 0227747 for the setup. the basic setup runs...