Search:

Type: Posts; User: D Max

Search: Search took 0.00 seconds.

  1. wich bin: $88 or $A1 for a V6 firebird with a 1227730 ECM and the DIS setup

    For the moment, I got a $88 bin running well, and a $A1 bin running also.
    I noticed some differences between them...

    Before I start logging, I want to choose the most optimal out of the 2, and...
  2. Replies
    16
    Views
    25,261

    The code 42 is been solved for now, seems like...

    The code 42 is been solved for now, seems like another bin is working....

    Now facing a next problem.....
    Did a little test drive today.
    my speedometer moves, but showed 5 mph at about 50 mph
    In...
  3. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    discovered today that the BFAU bin works also......

    discovered today that the BFAU bin works also... at least I have a base to work with..
    Advance works with this bin, and no SES light. Engine runs OK
    Only the tach does not work at the moment, but...
  4. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    Now it is getting weird..... today I put in...

    Now it is getting weird.....

    today I put in the original AZTY bin that works with the distributor....

    It runs (ok, it surges a lot...)
    but no code 42, no SES light, nothing....

    with a...
  5. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    bought myself a third ICM today. Connected it =>...

    bought myself a third ICM today.
    Connected it => same problem
    Seems not logic that 3 ICM's have the same problem, and nobody seems to have had the same issue.....

    tested the tach with a pulse...
  6. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    for the moment, i came to the following...

    for the moment, i came to the following conclusions:

    the ECM gets a reference signal from the ICM (=> fuel injection works + tach signal in Tunerpro)
    The 4 wires between the ICM and the ECM have...
  7. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    Did some troubleshooting today...... This is...

    Did some troubleshooting today......

    This is what i all did:

    checked all the connections, and they are like they should be on the wiring diagram above...
    Measured the bypass wire between the...
  8. Replies
    16
    Views
    25,261

    Today I checked my connections once more, because...

    Today I checked my connections once more, because i get code 42
    First i thought it was because I disconnected the est bypass, to check if the base timing was zero.
    So I disconnect the power some...
  9. Replies
    16
    Views
    25,261

    @ Robert Get the engine running with the DIS...

    @ Robert

    Get the engine running with the DIS yesterday.
    Runs pretty good, as I just used a 3.1 VE table...

    I just have no tach...
    I connected the white tach wire to the pin C of the 6pin...
  10. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    Today, I got the ignition working. The engine...

    Today, I got the ignition working.
    The engine runs quite good, but the ECM throws the code 42...
    I also have no tach.

    I do have a tach signal in tunerpro....

    Still work in progress..

    grtz,...
  11. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    I looked at the engine block, and the bunch of...

    I looked at the engine block, and the bunch of wires that came with the block, and indeed, it makes a lot more sense.....

    This sensor has only 2 wires, and they have the same color....
    Did not...
  12. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    I guess it will come down to the cps connections...

    I guess it will come down to the cps connections then....

    It could be 7x, i did not take off the harmonic balancer to count it.

    The connector of the CPS has 3 wires.
    As I found on the...
  13. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    Today, I installed the DIS. I used this wiring...

    Today, I installed the DIS.
    I used this wiring diagram:12174

    I used the pickup coil, original on the 3.4 engine.

    I get no spark.

    Someone that can give me a 'golden' tip?

    grtz, D
  14. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    Thanks.. Will the A1 work with the 700R4...

    Thanks..

    Will the A1 work with the 700R4 transmission?

    and maybe a stupid question, but offset 60°.... will that mean that if I switch the spark plug wires, i don't need to change a thing?
    ...
  15. Thread: 127730 with DIS

    by D Max
    Replies
    19
    Views
    30,905

    127730 with DIS

    Hello

    Since I build in a 3.4 V6 in my 1990 Firebird, I'm thinking for using the DIS that came with that engine.
    The engine runs great now, but has not enough power in the high Revs.
    Found some...
  16. Replies
    16
    Views
    25,261

    @ Robert... You mentioned before that you...

    @ Robert...

    You mentioned before that you switched to $A1
    I believe that is to use the DIS-system correct?
    Could you tell me what cables I have to reconnect/change to use the DIS?

    grtz, D
  17. Replies
    16
    Views
    25,261

    Hello Got the fuel ok by now bit by bit......

    Hello

    Got the fuel ok by now bit by bit...
    First the low throttle, now started to the higher throttle...
    Almost all the BLM's between 126 and 130....

    Noticed that when I go full throttle, the...
  18. Replies
    16
    Views
    25,261

    hello maybe I was a little bit too fast with...

    hello

    maybe I was a little bit too fast with my prevoius questions ...

    Done a lot of reading here on the forum and elsewhere on the internet, and I think I am a step further now....

    For the...
  19. Replies
    16
    Views
    25,261

    Hello Is there someone who can set me on the...

    Hello

    Is there someone who can set me on the right track.....

    I was expecting to simply find a table map/RPM/injector time and TPS/RPM/injector time, like on a lot of other programs I worked...
  20. Replies
    16
    Views
    25,261

    Hello problem is actually that I cannot find...

    Hello

    problem is actually that I cannot find the injector pulse tables at first sight in the XDF file I have.......

    can I assume that all the bin files for the different engines that use the...
  21. Replies
    16
    Views
    25,261

    Hello Mask problem is solved.... Was a bit...

    Hello

    Mask problem is solved.... Was a bit stupid thow....
    Was no present in the XDF, but I heard it was the 9th byte
    Got the value of 141 for the mask, so I thought I had to look in another...
  22. Replies
    16
    Views
    25,261

    is it possible I cannot disable checksum in the...

    is it possible I cannot disable checksum in the $88 mask?


    grtz, D
  23. Replies
    16
    Views
    25,261

    Today I tried a different laptop => same result...

    Today I tried a different laptop => same result

    If I have the time, I try tomorrow to connect it to another car (same year/type/model)

    Anyone who have some other suggestions to detect what the...
  24. Replies
    16
    Views
    25,261

    Hello I used all the files from gearhead......

    Hello

    I used all the files from gearhead...
    And a couple of other files....

    today, I even tried 3 differend ecm's, just to be sure the problem was not the ecm...
    Problem stays the same...
    ...
  25. Replies
    16
    Views
    25,261

    1227730 ecm, AZTY chip and a 3.4 Engine

    Hello

    Been new to this forum, so pleas forgive my possibly stupid questions....

    Some time ago, I changed my 3.1 v6 engine for a 3.4 (I know, is not a V8)
    Sticked with the v6, because over...
Results 1 to 25 of 25