Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: Six_Shooter

Page 1 of 4 1 2 3 4

Search: Search took 0.04 seconds.

  1. TBI injectors are VERY easy to modify for...

    TBI injectors are VERY easy to modify for increased flow. The top has a threaded stud that is usually staked or tack welded and if you grind the stake or weld off, you can twist the stud and change...
  2. Thread: memcal

    by Six_Shooter
    Replies
    9
    Views
    508

    Yes, and sorta. It can be read, and programmed...

    Yes, and sorta.

    It can be read, and programmed to a different MEMCAL, however, the LHM (Limp Home Mode) and hardware fueling side along with the knock filter will not be correct and will throw a...
  3. Replies
    4
    Views
    458

    You can connect the laptop any time.

    You can connect the laptop any time.
  4. Replies
    4
    Views
    458

    As Dave said Tuner Pro, or a scanner can see...

    As Dave said Tuner Pro, or a scanner can see codes while the engine is running. Even better to datalog a session or three and see what was happening just previous to the code(s) being set.
  5. Replies
    11
    Views
    1,207

    He is, I've met with Alan a couple times now.

    He is, I've met with Alan a couple times now.
  6. Replies
    11
    Views
    1,207

    Lots of good info above, and I'll be definitely...

    Lots of good info above, and I'll be definitely looking into that Arduino sheild, since I enjoy coding and using Arduinos (most of the time lol).

    I do use 14point7 products a lot, they seem to be...
  7. Replies
    4
    Views
    898

    I believe there are also pinout diagrams in the...

    I believe there are also pinout diagrams in the fileman section as well.
  8. Thread: Stock PCM

    by Six_Shooter
    Replies
    4
    Views
    895

    Doesn't Holley have a trans controller, that will...

    Doesn't Holley have a trans controller, that will link to the Sniper? I think I'd do that, so that the ECU and the TCU can communicate with each other and not need extra sensors.

    You do have a...
  9. The macro fix is only for the data logging side,...

    The macro fix is only for the data logging side, it should have no effect on the emulation side.

    Another thing you can try is uploading the entire bin when change things instead of each individual...
  10. Emulation is not inherently glitchy, once...

    Emulation is not inherently glitchy, once everything is set correctly.

    The biggest thing you have to do is disable checksum, by changing the MASK ID in the bin to AA. This goes for all OBD1 GM...
  11. Replies
    25
    Views
    2,699

    The picture looks fine on my PC. *shrug* I...

    The picture looks fine on my PC. *shrug*

    I don't recall the exact dimensions of the notches, but it was basically made to be very close in size to the original crank wheel, to avoid any errors in...
  12. Replies
    25
    Views
    2,699

    This is what I did on my 1985 Jimmy originally,...

    This is what I did on my 1985 Jimmy originally, then the wheel was transferred to my Nissan L28 (I used GM EMS and DIS on it) and then onto my LX9, where it is currently.

    I did modify the sensor...
  13. Replies
    7
    Views
    2,388

    I have PM'd you.

    I have PM'd you.
  14. Replies
    7
    Views
    2,388

    Crossfire EPROM

    Crossfire EPROM
  15. Replies
    7
    Views
    2,388

    ECMs, ECMs, ECMs...

    I have FAR too many ECMs in my possesion and need to move these onto people that can use them.

    I can (probably) include a MEMCAL with each ECM, just let me know what it is you're working with, and...
  16. None of the vehicle functions will be affected,...

    None of the vehicle functions will be affected, except possibly the cruise control, I'll have to look up the wiring diagrams to refresh my memory. Even if it is, there are easy ways around that.
    ...
  17. Replies
    3
    Views
    1,125

    Have you set the preferences in TP RT?

    Have you set the preferences in TP RT?
  18. Replies
    3
    Views
    905

    One way is to manually edit the bin file and then...

    One way is to manually edit the bin file and then add new items to the scalers tab to be able to edit them like you would anything else, but there is an XDF that has the patch built in along with the...
  19. Thread: MEMCALs

    by Six_Shooter
    Replies
    2
    Views
    1,119

    We have a forum way down at the bottom for this...

    We have a forum way down at the bottom for this very thing...
  20. Replies
    12
    Views
    2,287

    ALDLDroid uses Tuner Pro files and has a...

    ALDLDroid uses Tuner Pro files and has a customizable dash.
  21. Replies
    2
    Views
    931

    Both ECMs originally used 24 pin PROMs, 2732s,...

    Both ECMs originally used 24 pin PROMs, 2732s, there's also mention that they had 27128, 27256 and 27512s installed, but the 2732 is most common.

    Most user programmed EEPROMs will be the SST...
  22. Replies
    17
    Views
    5,431

    You will need to use a BIN that matches the PCM...

    You will need to use a BIN that matches the PCM you will be using. The '7747 BIN will not work in the '7427.

    There is a thread dedicated to the '7747 ECM:...
  23. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    1,505

    The detect emulation hardware button is for...

    The detect emulation hardware button is for emulation equipment only, the ALDL cable does not fall into this category.

    You need to setup the datalogging side via the preference tab.
  24. Thread: Need help

    by Six_Shooter
    Replies
    5
    Views
    1,505

    Ok, just to verify, since you're description is a...

    Ok, just to verify, since you're description is a tad confusing, or maybe just not clear...

    When you say you "plug in your diagnostic cable", is that the one that connects to the ALDL, or the USB...
  25. Replies
    6
    Views
    1,889

    I don't have a way to UV erase. I had thought...

    I don't have a way to UV erase. I had thought about programming an EEPROM, but that won't solve the problem I have. It runs off the MEMCAL, it just runs very rich, due to the larger injectors with...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4