The Delteq does use a Northstar module and coils.
Type: Posts; User: Tom B.
The Delteq does use a Northstar module and coils.
You need to use the 96-97 cover. The crank damper mount is also shorter to accommodate the trigger wheel.
The Opti without the high voltage running through it will be just fine. Just clean it up and seal it. The same sensors seem to run forever in the other cars they are installed in.
I will say this once and then I am done with it. Valve overlap has a lot to do with the way it affects how an engine runs. If your position is to the contrary, I can only surmise you are less...
Hey now! We did get a little off topic for a minute. Anyways, I am committed to help you guys find a good, reliable, economical solution. I'm sure Fast 355 will be just as generous with his time...
I agree with you about some of the so called "Pros". As far as the average tinkerer goes, one example for the trials and tribulations of the LT/LS swap that can screw up a tune is the injection...
No sweat. You can download the manual on Delteq's site. http://www.delteq.com/support_manuals.htm
Andy,
The delteq should be at your house on Saturday.
You are one of the few that had a relatively easy time. There are a lot of pro tuners that have had nothing but headaches. While the conversion isn't overly difficult, getting the tune right can be...
The 411 swap on an LT1takes a lot of tuning. You also have to put a 1996 and newer valve body in your 4L60E. I am finishing up tuning a 411 swap on my LT4 Hotcam engine that is heavily modified. I...
I have the Delteq convertors if you want to dissect one. PM me with your address if you want to look at it. I will say the only major flaw was the sealing and lack of a superior heat sink. The unit...
The delteq was the work around because of the driver issue. The system was developed over a decade ago. The beauty of the system was no programming changes were necessary. The average guy could...
Aroberson77
You have a PM
I have a copy of the diagram. Do you want me to send you a convertor?
Vilefly if you are close to a solution I am interested. I will post photos of the Delteq parts. The mounting brackets and convertor are the Delteq parts. The rest are standard GM coils and module....
The delteq wasn't bricking the pcm's. I'm still not sure what was doing it. It didn't matter if they were installed in the car or on the bench. I checked and double checked my hardware and...
The 93-97 LT1 pcms. the 93 is all by itself and is not a flash pcm. The 94-95 OBD1's are the easiest. 96-97 for OBD2. The only problem I have had with them is a lot of flashing issues and bricked...
Is there any chance you guys would consider doing a waste spark system ala delteq? They have been out of business for quite a long time. I had good success with their system when it worked. I can...