Search:

Type: Posts; User: babywag

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Update... eficonnection is correct for pinout....

    Update...
    eficonnection is correct for pinout.
    Appears it is NOT typical 0411 pinout.
    The sensors are indeed different.
    Swapped pins on both connectors and it fired up immediately.
  2. eficonnection 24x LT1 cam/crank sensor wiring question NO spark

    I am confused. Tried to fire engine yesterday and I am not getting spark.
    Harness was from 96 LT1, but I added wiring for cam/crank/coils from an 02 truck.
    Wiring checks out, checked every single...
  3. Very easy to swap 96 coil/icm into 94/95 harness,...

    Very easy to swap 96 coil/icm into 94/95 harness, just need parts/connectors and a few minutes of wiring work. Don't forget the coil wire is different for 96.
  4. go into settings and check com port selection ...

    go into settings and check com port selection

    on all my laptops eehack defaults to com1
    everytime i use eehack i have to change it to the correct com port.
    usually com3 for my usb aldl adapter
  5. is this a new sensor or used? they do go bad...

    is this a new sensor or used?
    they do go bad sometimes.
  6. Any good ground will work. Once a wire is...

    Any good ground will work.
    Once a wire is connected to ground it is "tied" together with anything else grounded.
    On mine I simply connected ALL the ground eyelets to a single bolt on engine.
  7. Replies
    4
    Views
    16,418

    I recently did 3.73 in my wagon and LOVE them. A...

    I recently did 3.73 in my wagon and LOVE them.
    A recommendation from 95wagon on impalassforum.
    Didn't keep ABS as it really never worked.
    I think 3.42s would have been disappointing for ME.
  8. Replies
    154
    Views
    158,457

    I think it's great you're working on updates. I...

    I think it's great you're working on updates.
    I suggest keeping the versions separate. or possibly an advanced option to enable/disable them and patches if including changes?

    Tried Kur4o version...
  9. Ok, found 'em...and changed 'em. I think I'll...

    Ok, found 'em...and changed 'em.

    I think I'll just run it w/ 4k to the pcm then unless anyone objects or has other reason(s) to believe something won't work properly?
    No transmission controls as...
  10. 16197427 - no rev limiter or fuel cutoff? Correct?

    I ask because just had a brain fart...

    So the 7427 recognizes a 4k vss signal, just registers as 2x actual speed.
    The VSS is "mostly" so the pcm understands when vehicle is moving or idling?...
  11. Went to local yard today...geez hard find these...

    Went to local yard today...geez hard find these things.
    Found a smaller one in a caddy.
    Different than any I've seen before.
  12. I did find that thread but no schematic?...

    I did find that thread but no schematic? attachment doesn't work anymore.
  13. It has no identity markings, that's why guessing...

    It has no identity markings, that's why guessing proprietary and haven't seen a datasheet.
    Kinda like odometer chip in my 94 Caprice....no datasheet.

    Aftermarket vss stuff is just stupid $$ imho....
  14. vssb 6758 chip has anyone ever located a datasheet?

    Just curious mostly, seems possibly a proprietary chip?

    Rather than hack a vssb module to do what I need it to do, I'd rather try to make a new one.
  15. Replies
    0
    Views
    1,709

    EE LT1 trans. tables question.

    Comparing 2 .bins both 16239501 & v4p according to info.
    What is the function/purpose of these 2 tables in language I can understand(lol)?

    One .bin has negative values which I am assuming is...
  16. Remember out txt conversation lol Gotta make...

    Remember out txt conversation lol
    Gotta make sure everything is "right"...
    Good to see you're making progress though! You'll get it done.

    And check this thread...
  17. Replies
    132
    Views
    209,936

    I am very excited! Finally a reality? I have an...

    I am very excited! Finally a reality?
    I have an LM7 on an engine run stand and a few 0411 pcm(s). Looks like I need an SX USB model from scantool.net?
    If you need some testing I'm game.
    Is there a...
  18. Replies
    32
    Views
    25,407

    Remove the EEPROM and solder in a flash chip to...

    Remove the EEPROM and solder in a flash chip to the memcal.
    A Burn2 from moates + cheap adapter will then allow you to read/flash the memcal. TunerPro used to datalog and modify .bin as...
  19. OBDI(1994) LT1 Caprice wagon best transmission .bin segment?

    Of all the bins out there, is there one that is better/best for transmission perf.?
    Short of comparing all the different LT1 bins, and not having extensive tuning knowledge on these, meaning I...
  20. Replies
    7
    Views
    5,454

    So let's give this man a prize!! Yesterday I...

    So let's give this man a prize!!

    Yesterday I started thinking about this and decided to check things out.
    It led me to discover something.
    Turns out the aftermarket alarm was robbing the main...
  21. Replies
    7
    Views
    5,454

    I'll try. I put in spare pcm and it flashed fine....

    I'll try. I put in spare pcm and it flashed fine. I'll try to duplicate error on the bench w/ one that refused to flash.
    I have a feeling the flash chip(s) are possibly the cause?
  22. Replies
    7
    Views
    5,454

    No VPP voltage is used as the means to reflash...

    No VPP voltage is used as the means to reflash the chip. It applies voltage to certain pins which allows erase/reflash.

    Car still operates normally, just cannot reflash due to this error that...
  23. Replies
    7
    Views
    5,454

    LT1 pcm won't flash anymore.

    This is on a 1994 Caprice wagon.
    I wanted to make some minor changes and have never had or seen this issue before.
    I've flashed it problem free many times using EEHACK.

    It gives an error stating...
  24. Replies
    3
    Views
    17,363

    Shoulda been more specific I guess...I was...

    Shoulda been more specific I guess...I was referring to the LT1 b-bodies like caprice/impala/roadmaster.
  25. Replies
    3
    Views
    17,363

    LT1 Buick roadmaster climate control hacking?

    Curious if anyone has ever reverse engineered one?
    Seems it could be low cost display/tool.

    Had no idea even existed until I researched switching my caprice to use a buick digital controller.
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4