You only need 2 wires from your WBo2 to the APU1's ADC connector.
Analog signal voltage is normally 0 to 5v. Just need the Ground and Signal wires connected.
LC1: from...
Type: Posts; User: T2000
You only need 2 wires from your WBo2 to the APU1's ADC connector.
Analog signal voltage is normally 0 to 5v. Just need the Ground and Signal wires connected.
LC1: from...
If the wind & rain stops sometime soon then I'll throw a standard 1227808 ECM back into my "mobile testbench".
It doesnt have the SXR upgrade so it can only output 160baud from the standard ALDL...
Hi Mark;
As per my earlier post the XDF is http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=2456&d=1337727128"OSE12P V111 - 1,2 and 3 bar.xdf"which is an enhanced version of...
Try increasing Payload size by 6 and leave everything else unchanged - worked for me ;)
Hi guys, sorry for the late reply - I have done a fair amount of troubleshooting in the hope that I can resolve my own problems as well as trying to help with yours.
Good news for me!
I have...
Yeah last time I looked there is a big ditch full of water right between my place & your place :yikes:
Strange I am sure that my attempts at WB02 and ADC1/2/3 logging saved in the xdl file.
I...
"OSE_$12PV111_1BAR - Petrol.adx"
&
"OSE12P V111 - 1,2 and 3 bar.xdf"
& I have tried both (on separate vehicles):
"OSE $12P V111 APNX V6.bin"
"OSE $12P V111 BLCF V8.bin"
I certainly havent noticed the glitch or error in other logged data... certainly not the usual suspects anyway (RPM,MAP,TPS,SPARK etc)
The XDF and ADX is OSE_12P which if you are interested is...
Again , many thanks for the excellent writeup.
It is really excellent & helped alot.
I finally got some data which is close... but I have one issue.
I can deal with offsets and factors to...
Sorry for the rookie question... but I am assuming that the body size needs to also increase by the same amount as the payload increase.
So we add 6 to both the payload and body size?
Great stuff - thanks so much for this!
I'll edit my ADX's and let you know how this goes.
Cheers, Chris