I am experimenting with tablehack today. Setting up a simple VE histogram. I get an analysis error: Could not refactor log logfilename
I used an XDF to load the table and I am using a dynamic...
Type: Posts; User: cmaje72
I am experimenting with tablehack today. Setting up a simple VE histogram. I get an analysis error: Could not refactor log logfilename
I used an XDF to load the table and I am using a dynamic...
What parameters do you change to disable dynamic blend?
Carl,
This is not his VIN but it is from a similar truck:
1GDG6H1B2YJ907913
Cal ID: 9384578
Hey thanks guys. Its for a friend of mine that has built an RV/Tow rig out of one. He is an hour away otherwise I would have just gone to pull the bin myself. I'm not sure of the details but he...
Anyone out there have a BIN pulled from a 1999 or 2000 Medium duty GM C6500 with the 7.4l gas engine?
Well this is awsome! I have not been to this site in a long while. I went back and forth with Dimented way back when he was figuring out the first flash tool. Got an AVT cable and did some...
Bringing this one back from the dead since I am wondering if you guys ever got a 411 to control the TC lockup on a 700R4. I am swapping out a LT1 for a 5.3.
I know I can easily control lockup with...
Did you have problems with Ghost? I have been using it for years in a corporate environment to create images for backup and deployment.
Works great. If you have a somewhat recent version you...
Are you usually moving when it freezes up? Check to see if your laptop has some kind of active shock protection. I use an older IBM thinkpad and it has this built in. What it does is park the HD...
Bunch of swap/wiring info:
http://www.lt1swap.com/
This is a bummer...I downloaded every 411 binary I could find on the forum and I can't find the usb stick I saved them to.
The box in the middle translates the OBD2 protocol into something that the computer can understand whether its VPW, CAN, etc. I'm hoping to have something interesting for us to play with in the...
Yeah I talked to them about those but none of them will do what I need them to do or at least they could not guarantee they would work.
I am probably going to get one from there but all I really need right now is an older cable that supports VPW. So if someone has upgraded and wants to sell their old cable cheaper than what I can...
Just bringing this back to the top in case someone has an old one they want to part with before I buy a development unit.
Cool project! I have a 3.0 merc in my little 17' Sea Ray. It runs pretty good on the carb though....not sure I need to add more electronic components.
I have a bunch of .bin and .cal (tunercat) that I have been collecting. Let me know where you want them uploaded.
For your new toy Eaglemark. I got it from the post over on delco hacking. I believe there is also one for ELM based interfaces around somewhere....
Heres another thought...not 120v but might work. I have an old electric scooter that has a speed controller with thumb throttle sitting in the garage that I got for free from my nephew because the...
More grounds never hurts. I like to run a ground from the alternator bracket directly to the battery in addition to the frame.
I'm in your area BTW. I live out in derby but I'm downtown every day...
I doubt it. I do not have a VSS at all and I have no other issues. My setup is on the engine that it was designed for though. You have such an odd combo of parts its hard to trouble shoot anything...
Some questions. What is your fuel pressure? What injectors? What EECIV manual (A9L) or auto (A9P) or something else? Is it a manual or auto tranny? Do you have a VSS wired in?
If you are...
Supposedly Moates and Xenocron bought out the last remaining supply of these chips so you can get real ones at either place.
Heres a link to a 5 pack at Xenocron:...
Tunercats OBD2 is much like the OBD1 version. I have never used it with a roadrunner so I don't really know what functionality that adds. I don't think it logs does it?
In playing with EFILive...
I have it set to 8120 on $DA3 for an 8000 PPM sensor. Its right on with my speedo.
Jeeps - its the waggy one and I think it might work for the $8d ecu's. I just went out googling and found this:...