Sensational
Type: Posts; User: MQQN28
Sensational
Thanks for that.
Its good reading.
Im adding it tomy look libary
Kilhertz
My one has no knock sensor. That stuff was removed from the bin. Your right Flatheads can live with out this.
This will raise some eyebrows. The limp home was removed also along with the...
Hi
Ive been running efi on my flathead for ten years. My ECM is an australian delco 808. Its a 20packet. You set the no of cylinders in the BIN
Im using a gm throtal body 60mm, the 65 mm runs ok...
Dave
I have fuel injection on a flathead. I have just been burned by what you are trying to do. The steering column I have is a Mazda rx/4/3 with the ign switch and lock in the column. I was...
look on pcm hacking you may find something there.
https://pcmhacking.net/forums/viewtopic.php?f=17&t=6921
15853
One of these or similar may be an option. Goes inline gives electronic pulse and mech cable attaches to end
Hi
Not a big expert on this but some basic checks
Are you using a straight jumper or a 10K resistor. You only need to flash it to start the data. Different jumper values give different data...
dktool
One other thing to check is that the ADX file is not set to receive via Bluetooth. If it is it may not work with a cable.
This is the RS232 checkbox in the tuner pro ADX editor.
A quick...
If you liked that one. You would probably like this as well. This is the documentation that comes with red devil, but is in an HTML file. I have put it to PDF.
Its their version of the tuner pro...
Ok
I finally got it. All I had to do was print it to PDF.
This is a nice readable copy
that was me trying to get the file up.
I pasted it and it looked messy so I took out it till I got the file up. Its a HTML file Im trying to get into a text file.
But sounds like you got it cut and...
This may help. Read through it if you haven't already got it.
The blue led means its connected waiting data.
Some body has put this up before as to what the leds do. I have one and the instructions...
Good point
When my engine was built the builder told me to use non resistor spark plugs.
When I Had my second tune they took them out and replaced with resistor one's same style and said they...
Stroked 388
My kit is from Flatattack racing in Australia. Its suits hot rods and early cars that want to replicate the beehive style oil filter. Mooneyes make a similar one. There are quite a few...
Hi
Stroked 388
Some info on these.
I'm running an after market oil filter on a model A. Not much room any where to put it. This one has a standard Z9 filter inside. They give off a bit of heat...
Hi
Shane
I'm in Melbourne
I'm running Delco 808 on a flathead. I've just updated to VR ecu to get 8192 baud rate. Found one at an affordable price.
Id like to know what adx files your...
Plazomat
Try this13163
try this link also
https://www.google.com.au/search?q=1227747+ecm+schematic&sa=X&ved=0ahUKEwjZ6e7kwbvcAhVGjLwKHXppBvIQ1QIIgwEoAg&biw=1546&bih=864
or is it the...
Try these files
MOC
My BURB
Try the New Zealand ones for a Delco 808.
They had the same as the Aussie ones but ran Leaded petrol for some time with out an 02 sensor.
I believe they ran open loop.
They are 20...
Dave
My system does not run a VSS. It is a customised tune on a delco 808. When it was developed in the mid 90's for the flathead it had a lot striped out including the VSS. I have learned that the...
Dean
I think it's this link
Its the BCC code with the bins.
Scroll down a bit. You will find some good stuff in this area.
http://www.gearhead-efi.com/gearhead-efi/bin/
MOC
Tyree
Great you worked it out. Theres nothing better to nut out a fault like that to success.
Never give up
MOC
Tyree
Some other things to check.
I had forgotten that I had to change a coil in both the hot rod and daily driver. The daily driver would crap its self coming home from work and the first time...
Johan
Glad that worked.
I'm not real good on 8192 baud rate, I've got 160 baud. What you could do is check out other similar ADX files for their command structure and try it. Even try other ADX...