Search:

Type: Posts; User: tra1nwreckage

Search: Search took 0.00 seconds.

  1. You think even with 7psi? Thats a pretty mild...

    You think even with 7psi? Thats a pretty mild amount of boost. I would assume fuel pressure regulater and bigger injectors wouldnt help? I could tune the retard on the moter that should help. Im not...
  2. Sweet so i got the motor timed. I took it out and...

    Sweet so i got the motor timed. I took it out and good amount of power :) was wondering whats some simple mods for gaining hp? I got the headers and was thinking edelbrock intake manifold but is it...
  3. Perfict eagle i just found it. Timing should be...

    Perfict eagle i just found it. Timing should be at 0 degrees? All stock 5.7 chevy tbi
  4. Hey guys got the ecm all set with the knock, and...

    Hey guys got the ecm all set with the knock, and egr deleted. Can anybody tell me the wire i have to disconnect to set timing? I just did the old lift the cap turn to top dead center and drop #1...
  5. Nope no room both flanges are like a quarter inch...

    Nope no room both flanges are like a quarter inch from block so just delete off the ecm. If the engine starts knocking its going to be rebuild time aswell.

    Anybody know a good inline fuel pump...
  6. Gotcha pjg yea got the burn 2 and chip adapter...

    Gotcha pjg yea got the burn 2 and chip adapter for my 1227747 ecm its getting handled. Going to delete the egr and knock and tune some stuff.......going to pop wheelies haha
  7. What in line fuel pump would you suggest for my...

    What in line fuel pump would you suggest for my application?
  8. Sweet thanks mark ill let you know how it turns...

    Sweet thanks mark ill let you know how it turns out
  9. Okay mark going to swap the fuel pump to a inline...

    Okay mark going to swap the fuel pump to a inline one up to the throttle bodies standard :) also tryee and i are getting the chip burn 2 to put a bin on eliminating the knock and egr from ecm. Do you...
  10. Oh yea its getting that it was in mid 20s when it...

    Oh yea its getting that it was in mid 20s when it was carbed. To much pressure a issue?
  11. Yea they are super tight........ And what...

    Yea they are super tight........

    And what should the stock pressure be?
  12. I think the knock sensor taken off the chip is my...

    I think the knock sensor taken off the chip is my only option because i have no other exhaust choices.
  13. There is no room for even a elbow its like a...

    There is no room for even a elbow its like a quarter inch to the header flange6248 [ATTACH=CONFIG] and as far as the fuel pump its a universal one from oriellys
  14. Havent re set the timing yet. No knock sensor...

    Havent re set the timing yet.

    No knock sensor because i have to run block huggar headers to get it to fit and the sensor is in the way.

    Have a 40lb fuel pump

    And vss? Does that hook to the...
  15. We did run the motor with the paper clip jumped...

    We did run the motor with the paper clip jumped from a to b. We didnt get any difference with the ecm or motor but i will take it out next time we try. Also did you know of a BIN that removes the...
  16. Oh yeah and i get a code 12 when key is turned to...

    Oh yeah and i get a code 12 when key is turned to "on" position and when i start the motor it flashes constantly with no gaps..... any ideas?
  17. That makes sense about the dist. So unplug dist....

    That makes sense about the dist. So unplug dist. From harness set motor to 0 on timing mark and plug it back in? Also do you have a link to a bin deleting the knock sensor i would appreciate it. The...
  18. I also cant get any change in rpms by turning the...

    I also cant get any change in rpms by turning the dizzy it just kills the motor. Thanks all for input
  19. Ment no vacuume leaks by the way oops

    Ment no vacuume leaks by the way oops
  20. Okay so plugged the map back in. Got a little...

    Okay so plugged the map back in. Got a little bulb to go between pin d and A5 on ecm to key switched 12v. Shows a code 12 which if everything is fine, but still runs like a vacuume leak........ its...
  21. eagle mark, tyree and i are doing the tbi swap.I...

    eagle mark, tyree and i are doing the tbi swap.I was wondering the steps in wiring the aldl directly to the ecm and do you jumper A to B then turn on the key for the code reader to pick up the...
  22. Thread: hi

    by tra1nwreckage
    Replies
    1
    Views
    2,707

    hi

    Hows it boing from tra1nwreckage
  23. Replies
    0
    Views
    2,618

    tuning issue

    Hey guys i swapped a 94 chevy 5.7 into my 87 mitsubishi montaro. I got all the info from this site and was very helpful in cleaning up the harness for my application. My problem is i got the motor...
Results 1 to 23 of 23