i ordered the service manuals for them so i could compare the pin out on both before i try it. I actually have a 85 wire harness that came extra with the car. If I ever decide to upgrade the engine I...
Type: Posts; User: 85Z28NOS
i ordered the service manuals for them so i could compare the pin out on both before i try it. I actually have a 85 wire harness that came extra with the car. If I ever decide to upgrade the engine I...
I recently purchased a 84 indy fiero and would like to upgrade the ecm. was wondering if the 85-86 ecm was able to plug in or do I need to change harness also.
welcome. nice to see another local with a camaro
just my two cents, but i found it easier to start with a bin from a 5.0/5spd with my preference being $6E 5.0/5spd/3.45 option. No matter what your going to have to tweek it to what the motor likes
Welcome. I think you will find this is a great site for tuning help
Welcome, your project sounds interesting
It really is sounding like you just have to much injector for your motor. As easy as it is to change them on the miniram its something you might want to consider. Im equally sure with enough time...
I found this bin someone had posted that they modified for a ZZ4 from a ARAP bin. He doesnt list what intake he had on it but thought it would be worth looking at if nothing else
Welcome! I have built many g-body cars over the years. The last one was a Regal that i built for my wife . I put a chevy 350 in it from a van and it was one of her favorite cars ever. They are great...
I have been going back and forth between a $32b ans a $6e using stock bins just playing aroundto learn more about them. One thing i noticed is my 32b runs better on cold start up but runs rich once...
did anyone ever get a copy of the ANYX bin? I am still unable to find a copy
OK. If you are using a 165 with a $32b then you must have the 10K switch turned on at all times. If you switch it off once connected it will disconnect and show an error. Also you were correect in...
Ok, I got rained out last night so i didnt get to check anything till today. After checking all my wiring on my heated O2 sensor and finding nothing wrong I decided to switch back to my original chip...
Your right about the $6e needing to have the 10k turned on then turned back off in order to start coms. Tried it out today, but my blm still stuck on 128. Need more time looking at setting to figure...
Actually, GM did build these and even drove them on the street as test vehicles. The S-10 had a LT1 with all wheel drive( from a Bravada ) and was running around wearing 17X9 corvette rims and tires....
I purchased this from Moates and it said to have the selector on the box set to the 10k. So I should try switching it to open once it starts communicating. I will try this later today
Mine never ran good like that even with the 32b factory chip. I have a fully ported intake, SLP runners, Bosch 3 injectors so it tends to run a litle rich.
I am using a 32b on a 165 and every time I plug into my aldl to record some data using tuner pro and moates extreme aldl usb connector it sends my car into ses and my blm lock at 128. I can actually...
Burned a $6e chip today and only tweaked the fans to try it out. Car started sooner than with the original and seemed to run just fine. One more question, will I run into an issue if it goes into...
Yes, i do have vats on my 88. Already looked thru different bin files and found one to try. The program is different from a $6e and a 32b so i was just concered that maybe the pin out was different....
Can I simply burn a $6e chip from a 89 and replace the $32B in my 88? I will be switching out my TPI in favor of a HSR and wont be using the 9th injector
I am a firm believer in doing everything yourself and it felt great to be able to do it. I won't lie though, i tried another chip with some timing
mods and the egr tuned of and it ran like crap and...
I didn't change much from stock, but am happy to have it running from a chip I burned
here it is
I have a 88 305/5spd w/3.45 AKFY bin and was unable to locate it for download also. Wound up buying the moates adapter and reading it from my chip