Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: 1project2many

Page 1 of 4 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    1
    Views
    57

    Welcome. There's a bunch to learn in the...

    Welcome. There's a bunch to learn in the beginning so don't be afraid to ask questions.
  2. Replies
    52
    Views
    16,146

    As I remember it the double jumpers are not...

    As I remember it the double jumpers are not redundant. If you look at factory calibrated VSSB units there are always seven jumpers. If you place a jumper on the right then you have a matching open...
  3. I also bought one from a local seller (Maine). ...

    I also bought one from a local seller (Maine). Like Fast355 it was built for my vehicle. 'It's held up well but I also pair 4L60E with very large cooler in any of my vehicles. I can get the name...
  4. BTW, I was just thinking about how much work your...

    BTW, I was just thinking about how much work your son did for you. It's good to know there are mechanics that take pride in their work. It's reassuring to read there are still some kids who take...
  5. Replies
    11
    Views
    391

    Interesting. So just how often does the tuner...

    Interesting. So just how often does the tuner using nitrous recognize that his oil has just saved his bottom (end)?




    If you can produce greater power then you will decrease the response...
  6. Replies
    11
    Views
    391

    My understanding is that 94 and later 8051 ecms...

    My understanding is that 94 and later 8051 ecms calculate acceleration enrichment dynamically. The 92-93 cars have more traditional code which monitor throttle angle and / or load changes to trigger...
  7. Hi Bryan, You're lucky and you realize it. ...

    Hi Bryan,

    You're lucky and you realize it. This is a good thing. I work in a business where I frequently see people who believe that they are as bulletproof as they feel, even with existing...
  8. Replies
    11
    Views
    391

    Transients such as sudden throttle angle change...

    Transients such as sudden throttle angle change or load change affect manifold air density. The purpose of the transient tables is to instigate a rapid change in fueling to maintain the manifold AFR...
  9. Replies
    11
    Views
    391

    Injector changes typically require changing flow...

    Injector changes typically require changing flow rate, transient tuning (acceleration enrichment and deceleration enleanment), and injector corrections (voltage and small pulsewidth) at a minimum. ...
  10. I'm not sure I would go through the work of using...

    I'm not sure I would go through the work of using an OBDII controller. I would likely switch to a 94-95 16197427. Datalogging speed is more than sufficient for most projects, real-time emulating is...
  11. Thanks, everyone. The original truck was 2002...

    Thanks, everyone.

    The original truck was 2002 2.2 / 5 speed. It's currently 4.7 / 4L60E. The owner is hoping the stock ecm location cn be used and most of the stock in-cab circuits will work. ...
  12. Recommendation for custom LS harness?

    Hello,

    This may sound strange but I'm looking for recommendations for a custom harness builder. A friend has an LS swapped into an S10 and needs to complete the project. He asked me to build a...
  13. Replies
    52
    Views
    16,146

    If there's no mechanical speedometer then I'd...

    If there's no mechanical speedometer then I'd probably opt for all electronic components, unless the cost to do so is crazy high. IOW if you need two or three converters all purchased at retail...
  14. If it's '87 then it's probably "hot fuel...

    If it's '87 then it's probably "hot fuel handling" and likely from a one ton or three quarter ton truck.

    Hot fuel handling was simply extended pump run time at key on (or off, can't quite remember...
  15. That appears to be a diode module or a "hot fuel...

    That appears to be a diode module or a "hot fuel handling" module. What year truck are the parts from?
  16. Replies
    2
    Views
    269

    Hello, A TBI 383 is likely to require a fair...

    Hello,

    A TBI 383 is likely to require a fair amount of tuning. The volumetric efficiency of the engine should be much greater than stock and with the heads you've installed I would guess that by...
  17. Replies
    1
    Views
    190

    Hello and welcome. We do have a ton of...

    Hello and welcome.

    We do have a ton of confusing information here. lol. But we also have a bunch of people willing to help you learn what to do with it so feel free to post questions. And...
  18. Replies
    1
    Views
    195

    Hello and welcome to the forum. Do you do many...

    Hello and welcome to the forum. Do you do many swaps or is the stand for this project only?
  19. Thread: Sup guys

    by 1project2many
    Replies
    1
    Views
    218

    Hello, Welcome to the forum. LS swaps are...

    Hello,

    Welcome to the forum. LS swaps are welcome here. We don't discriminate... :)
  20. Replies
    1
    Views
    217

    Hello and welcome. I was involved in stuffing an...

    Hello and welcome. I was involved in stuffing an LS into an S10 truck. It was interesting mating the OE harness from the 2.2 manual to the LS pcm.
  21. Hello and welcome to the forum. This sounds like...

    Hello and welcome to the forum. This sounds like a fun project that will definitely poke the Ford guys a little.
  22. Thread: Hello.

    by 1project2many
    Replies
    1
    Views
    202

    Hello, Welcome to the forum.

    Hello,

    Welcome to the forum.
  23. Replies
    5
    Views
    821

    You may not need to be skilled at programming,...

    You may not need to be skilled at programming, but you will need to find a reference that provides the needed information. Essentially you're just decoding a bunch of values. If you have a...
  24. Replies
    5
    Views
    821

    Tunerpro allows you to create and edit XDF files....

    Tunerpro allows you to create and edit XDF files. I would recommend beginning with an existing file to see how the parameters are set up. Select an XDF, select a parameter or table in the LH...
  25. Welcome to the forum. That's a nice collection...

    Welcome to the forum. That's a nice collection of trucks to play with. The TBI engines were super reliable and with a little work could be made to respond fairly well. Personally I think the...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4