Sorry, but it's difficult to help. Questions are asked or solutions are posed and there is no response. Specifically in Post #14: You say will not start in neutral. What about Park? P/N switch issue?...

Great. Log may be helpful. In the meantime, any chance you're building up gas tank pressure in that 10-15 minutes of driving? This can happen if tank not properly vented or exit line clogged,...

I wouldn't worry about spark for now.
-VSS showing in 4th gear when idling, etc. Something not wired correctly.
- Look at sample 7750. Weird data and a software interrupt error. This just cannot...

You haven't reported on the status of your spark issue resolution. I'd hold off on v6 until that's resolved.

Regarding v6, respectfully, detailed instructions are provided in the included READ ME.

In all my years of doing this, I've never seen that XDF or that Scalar text (EXPERIMENTAL spark angle). Whoever developed this XDF did not know what they were doing or they were using if for an...

Can you please post the XDF you're using? I know $8d code inside and out and have no idea what that is.
Tks!

Two things:
1) What exactly do you mean by "set spark angle to 45"
2) Look at your spark values in 2.xdl. You could also see these things if you exported the xdl log to a csv (TunerPro:...

Please be more specific as to what not understood.

Since your are running $8d, I exported your log using the S_AUJP XDF (attached). That will cause some things your BIN does not have to be...

If you can post a log file from TunerPro I'll try to help. Either post an .xdl log and your XDF file, or an exported .csv file.
Thanks