Thanks for the reply. I checked that and it is set to the same flow rate in my BPC calculator. It has me wondering if the actual flow rate of the injectors is more than whats calculated.

I will try to post the timing table once I figure out how to take a screen shot from my laptop.

Would anyone know why the Trip meter, in my Whats up Display, would show that I should be getting...

I have Lean cruise active and its set for 16.5:1 and adding 5° of timing

Sorry it has taken so long for an update. I have had a lot going on this summer. Some planned some not so much.

I did increase the timing and ended up with spark knock in some areas. I have...

Thank you for the reply, PlayingWithTBI,

I will give it a shot with more timing and see what happens. I tried to copy and paste the tables that DaveW graciously provided but the RPM and MAP rows...

Thank you, Playing With TBI.

I will give that a try. I see he has 8 degrees more timing in the areas that I cruise in.

After changing the tables and doing a few VE learns, I will see if I get...

Thank you for the reply, Dave

I can adjust my spark advance map. In fact, I had to use a timing table from a different vehicle that used open chamber heads instead of the TBI swirl port heads....

Thank you for the reply, tayto.

During the VE learn process with the Dynamic EFI EBL Flash II system, It is not in closed loop while learning with the WBO2 sensor. I am assuming the BLM and INT...

I have been doing VE learns and smoothing the fuel tables for the last few weeks. I seem to hover at the 14mpg mark.

While doing more VE learns with my WBO2 this morning, I noticed something. On...

Thanks for the reply Dave

I am tuning by using AFR. I have the capability of using a NBO2 or a WBO2 sensors.

In all reality, the EBL Whats up Display is doing the learning through its VE learn...

Good morning,

New guy here and new to forums. I apologize if this post is in the wrong place.

I am new to tuning and have been playing around with my Dynamic EFI system and reading lots of...

Thank you for the warm welcome!

I have read lots of posts there also. There is a ton of information out there. I just have to sort through all of it to find what pertains to my set up.

I...

Hello everyone! My name is Mike. I am new to tuning and most of my questions have brought me here.<br><br>Im trying to learn how to tune an extremely mild 350 TBI with the Dynamic EFI EBL Flash II...