Copy of my follow up information and some info for others that may develop a similar hard start issue.
Hello Bob
My name is Brian Lobert. I bought one of your kits a while back and am very...
Type: Posts; User: beestoys
Copy of my follow up information and some info for others that may develop a similar hard start issue.
Hello Bob
My name is Brian Lobert. I bought one of your kits a while back and am very...
Second on TBI not being able to handle it. I have and old holley dual TBI on a tunnel ram that i have been told will support 750 plus HP. the throttle bodies are just like the GM 2bbl units so he's...
Ahh ok thought that pic was of a LT1 unit I'll have a look at the the spare I pulled when I got ours for us and see if i can figure it out. Might just be the return line does the job of keeping it...
Steve
I'll be beck in town soon I could run some tests if you want. Just give me a heads up on what your looking for> I'll see about scoring a different computer. Thinking it may be as cheap as the...
The siphon jet is at 2 and 3 the action of the fuel being circulated creates the low pressure zone that creates the siphon effect.
Thanks eagle I'll get it loaded and see what hppens I did find the original Dave had made for the board and sent it to my house as well.
Ok just found out via another search engine leading to a thread on this forum it was in fact stripping out the formula's. So if you download an application and get these error messages the spread...
Hey has anyone tried to use this spreadsheet.
http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=6401&d=1391371615.
When I try to download it I get this message.
Excel...
Sure enough I know I saw at least 3 or 4 out there when I pulled the pumps and tank for my setup.
I'll take a look kind of a full weekend this weekend have to put a cruise control in a blackbird and moving a storage unit out but think I can gt that way next week. Let me see what I can find and...
Steveo
Your best bet is to get the bucket out of the fbody and go back to that setup with your walbro. That pump is specific to the fbody setup. i had one in the camino and found out the expensive...
Hoping so
Then I can get to logging and tweaking on this thing finally.
Noted Eagle then I'll go back in and correct for the right calculated values and run a base line again.
Steveo
I'll reset the BLM's and run it setup as Eagle suggests for a base and let you know...
Well I'll be
Went out to check the size as suggested by another member and found out that when we did the bailey LTCC instal the sensor got flipped and was in backwards. turned it around the...
Steveo
I am running a K&N Cold Air Kit with there plastic elbow coming off a 8 inch cone filter up to the MAF sensor input. From the MAF to the throttle body is stock plumbing.
Eagle
I'll...
I'll see if I can pull up a stock table and compare it to what is in there then.
So would it be your opinion that it may need to be replaced have you seen one do this when it went bad?
And I...
Made a big discovery today I got to thinking what you guys have been saying about the system goin SD when the MAF is unplugged.
A little back ground is in order.
93 Camaro LT1 M6 in a 72...
OK an update and I'll open another thread as well to help others going down this road again.
The big discovery came today when I got to thinking what you guys were saying about the system goin...
OK an update and I'll open another thread as well to help others going down this road again.
Eagle check my 02's location and found that when I did the instal there wasn't any ports in the header...
Most of the older designs were not fitted with components that can handle the alcohol. Some of the rubber will break down (Orings). It is also corrosive by nature and can actaully etch the metals in...
I would also recommend finding a factory manual it will come in handy older project vehicles can be fun and tormenting as well at times. The manual will be a good investment if for nothing else but...
Great find I once traded one of these for a 1970 Barracuda track car. You should be able to cross the model number in ingersol to get the specs on the head. If you clean off that plate under the...
Noted eagle I have to take another look. The Elite's I have in there put it at the bottom of the collector merge. Thinking about it you may a very good point I may move the mount points there and...
Ok tank is out going to upgrade to newer style siphon bucket system like in Greg's Camaro. The original system was pump on a stand connected to the fuel line out of the tank. The tank comes from a 87...
Looking forward to it Steveo. I am using your latest now. Dropped the tank tonight to upgrade the fuel pump to the newer siphon jet design. Then it'll be wideband header ports.