I have had problems emulating with tunerpro & autoprom. I bought several computers before I realized that I spiked the computers while emulating & could remove power and that would return the...
Type: Posts; User: bar0403
I have had problems emulating with tunerpro & autoprom. I bought several computers before I realized that I spiked the computers while emulating & could remove power and that would return the...
I kept looking and found $od/$oe fan control @ GM Efi systems/ecm bins/16197427 pcm info $od/ Thread:Another option for $od fan control/93v8s10 efan control.zip. Now if I can just understand what I...
I remember (big deal for us old points & condenser guys ) manually inserting the code. I don't remember the location and will have to have the code table. Try as I might I can't find anything that...
I have used this $OD E-Fan Control program in the past, but can't remember how to install. I am using Tunerpro RT V5 with a Moates Autoprom. Help!
Does anyone have a rundown of what the various functions of a 94-95 GM 16197427 memcal are? Is reflash possible?
C14 has no output. C10 does have a square wave that is not being used. That will work for the speedo I am using. Is the C14,15 signal 2000 pulses per mile ?
Changeover to 4l60e & f.i. on olds 403 w/95 c1500 truck bjyk 16197427 ecm. I have a factory scan tool & a digital oscilloscope.The B+& B- check good. The speed sensor output, & the vss buffer square...
Makes sense to me, thanks for the input.
It shows a ignition positive to the brake switch and a purple wire to e-13 on the computer. I need to know if that switch is normally off, (what my wiring diagram shows) or normally on and breaks the...
I want to change to 4l60e trans & fuel injection. I have a 16197427 ecm & wiring, is there a way to get sequential injection from this ecm?
Dave ; Thanks for the info. You are right on and using the same stuff I am. I finally remembered where that info is found. In tunerpro it is in scalars under wbo2 datalogging. It gives complete...
Is the 16197427 ECM advanced $OD TP5 v 251 set up for a wideband connection at B16 ?
I have had the same problem with a autoprom, it datalogs ok and I like being able to burn chips with it but haven't been able to emulate with a 16197427. It spikes the computer and I have to remove...
Works like a champ. You be da man, Thanks
Copied file to my bin, not getting any response. Difference tool shows file highlighted as item not defined. ADX is different than mine, does that make a difference? My stuff is BHRJ5896 bin,...
After thinking about I realized that I am using bhrj 94 s&t truck bin. Looking for 185 deg. f. on 175 deg. off. I am a little slow sometimes, but I manage to get there.
In my 7427 tunerpro scalars is a initial timing setting that you set to the same as you set the mechanical timing. This is added to total timing in the timing tables. In my case 12 deg.+24 deg.= 36...
I am not sure how to identify which bin
Looking for a way to understand how to code (greek to me ) $od efan. Not having any luck.