so, heres the scenario:
i have a 95 silverado, 5.7 tbi, 4l80e, 3.42 gears.
its running a BJDR bin on a moates adapter and EEPROM successfully to facilitate the 4l80e swap.
have about 2k on...
Type: Posts; User: dusterbd13
so, heres the scenario:
i have a 95 silverado, 5.7 tbi, 4l80e, 3.42 gears.
its running a BJDR bin on a moates adapter and EEPROM successfully to facilitate the 4l80e swap.
have about 2k on...
No sir. It requires adding in on the late tbi ecm. I saw theres a way to do that, but thats way down the road. Right now im at basics until i relearn all the stuff i used to know and lost after the...
Sorry. Got the masks confused doing it from memory. Not bad for only one cup of coffee!
I know that i saw ewas to add the same values to seleced cells or whole tables in a tutorial somewhere. That...
Since my trans swap, my 1995 c1500 is getting 12mpg no matter how or where i drive it. 4l80e conversion with a sto k $od bin. My other truck with a 4l60/$0e is getting 14-18.
Id like to bump...
Truck is a 1995 c1500. 5.7 TBI, recent4l80e swap using BJDR bin burned onto a memcal using the moatessoftware and prom adapter. Stock everything else with 166k on it.
Since ove pwned the truck...
Found all the information for swapping the pins (wiring harness diagrams and a write up)
With going from $0d to $0e, will using the original $0d memcal fpr the knock and lomp modes cause trouble...
So, changing to a differed code, like bjdr: do i need to worry about the stock memcal stuff? I have the moates adapter combo kit on order with some chips.
Im leaning heavily on this post, as it...
If you're interested in getting rid of one of them, let me know. Would LOVE to experiment with this.
Ah. Sorry. Misworded that i think.
Im competent in basic windows and Microsoft office operations, and pretty good with google. Thats the basis of knowledge im comfortable working from, as i have...
Ive been in and out of the tbi game for a few years now. Even dabbled in megasquirt.
However, that was before my 64 got totalled and i got sorta scrambled in the dome.
So, im going into this as...
the idea behind tpi is increased MPG, as well as all the low end torque i can get. its a truck, that i use for truck stuff. primarily open car trailer, tow dolly, etc. i found the tbi 350 in my other...
problem with google is i couldnt figure out what to search to get the information i was looking for! one of the joys.....
also, that write up in GMT400 is bang on! thanks!
So, one thread for two different thought processes.
First and foremost is transmission.
It seems that the 1995 gmt400 truck 4l60e is a one year only thing. Mines giving signs that its on the...
I think my old aldl cable is dying, but im not sure.
I have no idea who's it is. its a serial port unit, that plugs into another cable, that plugs into an adapter, that plugs into a usb...
looking through the datalogs again tonight, I'm noticing that in open loop my oxygen sensor is either 450 or 0. no changes from those two, and 0 for most of it. ideas?
I'm going to burn a new prom...
so, in my application I'm using a 7727 ecm. to get tunerpro to talk to the ecm, I had to use the 10k resistor. why? what purpose does this serve othern than putting the ecm in service mode?
the other baffling thing that may play into this, is that to get tunerpro to talk to the ecm, I had to use the 10k resister. from what ive been reading, this should not have to be used. I'm also...
attached is the data log from the most recent testing on my 7727 ecm equipped, TPI based small block mopar. I'm baffled. according to the sensor data, I'm running dead lean. according to plug reading...
I'm working with an AXCN $8d .bin in my swap. just finally got it to test fire on full injection last night after burning a new chip with no VATS whatsoever.
since this is NOT a stock 91...
only com option I'm getting is com5, which near as I can tell in windows 10 doesn't correlate to anything.
additionally, I cant find a compatible driver for my usb to serial adapter. so I guess...
have the tpi based swap in the duster, and its not firing the injectors. so I go to load up tunerpro rt and my aldl cable. cant get the laptop to recognize the cable.
what I'm using is an old...
new questions:
ignition is going to be ecm controlled. I have no issues in adapting the gm module to the mopar distributor (same trigger sensor between the two). matter of fact, I rebuilt and...
Wound up buying a windows laptop cheaper than a chromebook. Not exactly a fan of windows 10 yet, but it's growing on me.
Thanks for the help guys.
More appropriate, was murdered by a six year old.
Thinking about a chromebook. Can I run tunerpro on one?
http://www.gearhead-efi.com/gm-ecm-pcm-conversion/in-tank-fuel-pump-conversion.html
i apologize that my initial post didn't contain all relevant info.
that is the link to the "how to" using...