Do you have any logs to post up? If you do put it up with the bin and Ill see if I can make any suggestions
Type: Posts; User: azxj
Do you have any logs to post up? If you do put it up with the bin and Ill see if I can make any suggestions
I have a very similar setup, and just ordered a very similar cam from lunati. I will be installing and working on the tune next week. How do you like the cam other than the idle?
Changed the ground point, did not change anything. Took the car to the track last night, I can effectively datalog but cant use the live controls. Frustrating. I at least have no problems...
I am using eehack for datalogging and flashing and using tunerpro to edit the bin files. I purchased my cable from aldlcable.com
Maybe 20 miles haha, I have just been driving it around my neighborhood. Its just going to be a track car unless something changes. I have no desire to drive it here without a/c except in the...
I currently have a 96 Roadmaster with a 95 pcm with an auto. I did not do anything to modify the trans except install a stall converter or harness. I did however solder in the resistors on the...
It is grounded to the body at the drivers side kick panel using the same bolt as several other interior grounds. Maybe interference from the other stuff there? I have a good body to engine ground...
I did exactly that and still had the same problem. It is my wideband causing the issue. As soon as I disconnect power to the wideband it gets zero errors. I am using an AEM wideband with the gauge...
I decided to just go through and remove all of the fuses I thought the car would run without and test. It appears you were correct steveo as it is no longer throwing a bunch of random codes for...
So, I took out the obd1 pcm and put in an ob2 pcm from a 96 fbody, I hooked up my modis scanner and couldnt see anything weird in the datastream, there were several codes all of which were from...
Finally got some time to work on it, same problem with the flashing all different codes up for a split second. It does seem a little slower with the errors but who knows if its just wishful thinking...
All ground have been checked and are at their factory locations. I do have logs, several. I put in a new opti over the weekend that of course was bad out of the box. Swapped just the pickup from...
yes, same issue with scan9495. Blinks on and off green red for sync, bunch of random codes all the time. I still have 2 96 pcms I may try putting on of those in and see what comes up with my Modis...
There is not much left in the car, I am building it for a drag car so removed everything that didnt make it go. Like I said, previously I had no issues with it but now its got a mind of its own. ...
I have previously had no trouble with eehack and have used it to data log and several times to flash. The car sat for a couple months with the engine out while I was rebuilding it to a 383 and now...