Ok, sounds like a lot more than I thought.I think I'll just have to put my car on hold until I can save up enough for EFILive. My plan was to take the car to a tuner to put on the dyno, but that is...
Type: Posts; User: evilstuie
Ok, sounds like a lot more than I thought.I think I'll just have to put my car on hold until I can save up enough for EFILive. My plan was to take the car to a tuner to put on the dyno, but that is...
Babywag,That was my initial plan, but the programmer I bought (TL866) didn't come with the right adapter, and the BDM programmer I bought was only for 16bit controllers not the 32bit Motorola chip so...
With COS3, it's a modified version of the 12225074 OS yes?Would there be much involved in modifying the XDF for this to work with COS3?
Hey mate, sorry I assumed you were using some other software so you could just copy and paste the tables into excel, make the changes by formula and paste back into the tune file. I didn't know you...
Checked yesterday and the timing is pretty rough, and it looks to be sitting around 5degrees at start and then slowly climbs to around 20 as a apply throttle and the motor warms up. Does this need to...
It runs it runs it runs!!!!!!!
https://www.youtube.com/watch?v=08F3poNtivo
Hi LRT,
It is so close to starting, but just not quite there.
I'm gonna try adjusting the dizzy slightly to see if I can correct it, but is it possible for you to copy the L31 spark tables from...
Just plugged it in to the car and nothing. Quickly just checked and I thinks its just a fuse, gotta head out for birthday lunch with the missus and then will figure out whats going on and let you...
Legendary!
Thanks mate. I'll try it out now.
Gear ratio is 2.73 with 225/60/15" wheels, but I'll get an exact measurement. I can give you the .BIN file of the car the transmission was out of if...
Hey LRT.
Here it is.
If you're able to remove VATS, segment swap the 4L60E transmission in and maybe even set the diff ratio to 2.73 and maybe set the bank assignments to SBC order instead of LS1...
Yeah, so far I've had a couple of weird OS's from Holden PCMs.
I've now got a Holden LS1 MAFless tune with COS3 1290003 unlocked that I'll post up this afternoon.
I wish I had the XDF for this one...
Hi,
I just checked a .BIN i have for 1290003 and the VATS is reporting its off with your XDF, but EFI Live says its on class2.
Also a lot of the values on scalars is wrong too.
First example I...