Search:

Sorry I didnt update the post, I had some other stuff come up in life and I was falling into a deep depression and had came up withthis crazy ass notion that i wanted to live in a van and travel the...

Pretty sure the ECM will look for the shift to be completed in a certain amount of time, if it doesnt see it it will try and increase the shift pressure itself until it either maxes out giving a...

I seen this a bit late but would like to say that was a great thing to do . That is why this is one of the best pages around because everyone here want to help someone no matter what . Great support.

yep Ive used $8D says connected but I cant gather any data...and I need to get an adapter for the serial cable on my wideband.

biggest problem I have right now Is I cant get the data logs, I have the gauge setup,and tunerpro says its connected for DL but I get no readings Ive tried every .XDF I can find , nothing . I cant...

Holy shit I just figured out how to use the compare tool on turner pro. holy shit its like I know halfway whats going on how, I can see the differances in tunes between 2 or more.bins on any...

I moved to FLA in may I think and stayed till august, I liked it, just wasnt finding the kinda work I needed. came to N.C. in august and finally had the time and money and urge to work on her. not...

OK Ive been getting some work done to her, Shes running and driving and I finally got off my ass and welded up the exhaust , and welded in a extra O2 bung right at the y pipe merge, and picked up a...

Also alot of people just dont think of this but as part of the tune up its a good idea to pull off the tbi unit and rebuild it, the o rings shrink, especially of they havent been replaced since they...

yeah the whole "Z28 spring thing is like x rods and "Vette heads, its all BS just get some good skip white springs.

OK Im kinda lost, I have a good deal of paperwork printed out describing what all the functions do, but I really dont know where to begin with my tuning, If I install the tuning adapter without a...

OK fixing to start tuning, I noticed the chip is AXYC that come up as a 90 f car 305 5 speed, Mine is a 92 ..... soory I had it listed as TC it was actually YC ok I found someone else on line that...

G1 adapter ordered the other day so I should have everything now. really wish I would have ordered the adapter the same time as the ostrich but someone said I didnt need it.

Gonna need that knock sensor too

Worst part about the crossfires , is the tiny intake runners and tiny cam....welcome , I've always wanted to do a updated crossfire build in an 82-83 camaro sport coupe.

OK Im down in Fla and kinda settled, Im gonna order all m stuff to tune with, I drove the car some more, and it loads up in 5th, you have to pull it down into 4th to drive it, Can I send someone a...

Sorry for the late reply, Im working on moving to Fla. I drove the car yesterday, runs pretty good, having clutch problems so I couldn't drive it like I stole it, I hope to be able to start on...

Next question, does the Ostrich 2.0 do everything of will I need a socket adapter . I checked and it is the "730" ecm

yea I read that and didnt get a chance to delete it

Here is another question, Can I used the same ASU to tune my 2000 tahoe limited with the 5.7 vortec ?

Sounds like a plan, Ill double check the ECM number when I get home from work, working 12 hour days this weekend.

Yea Id like to learn to tune, I have the 1320 bluetooth adapter for datalogging, just hate to spend money on tuning stuff for this ecm if Im just gonna swap it out for a later one that uses flash...

For now yes...hope to swap to a better ecm later.

I have a 1992 B4C 1LE camaro , had a TPI 305 5 speed now I just built a 880 vortec block, eagle rotating assy with flat tops, blue print engines aluminum heads zz4 cam 1 3/4 headers into a 3 inch...

So yes it should fool the O2 sensor into thinking its lean and tells the ECM it needs to add fuel hence the Rich condition.