I have BURN2, ALDL cable with jumper, and g1 memory adapter with a butned chip from mark before he passed for a 355 vortec with mild cam and performance intake. Really woke up my engine. Also have...
Type: Posts; User: Shawn1989
I have BURN2, ALDL cable with jumper, and g1 memory adapter with a butned chip from mark before he passed for a 355 vortec with mild cam and performance intake. Really woke up my engine. Also have...
There is most definitely a flex line in there. Rubber hoses to connect them from copper pipe to engine and same with radiator.
Finally decided to work on the old donkey and got it up and running again.
I performed a datalog AT IDLE of what the computer is seeing. As you can see, the idle jumps up spontaneously for no...
So if i purchase ostrich and download needed software, would you remote tune? :)Cash in hand :)
I am currently getting some stuff tig welded so the engine will actually be able to receive boosted air
also need to get new plugs, wires, cap, and rotor...... car is missing like a SOB at 6 and...
it worked :D
so, what should i start at?
http://i65.tinypic.com/71jmtk.jpg
Ok ill check when i get home after work.Can you make a list of the items on this xdf that i will mainly be messing with to tune it both naturally apirated and boost?
Alrighty, i messed around with it for HOURS trying to connect to tunerpro..... messed with com ports and everything, wouldn't connect. Tester said it was reading perfectly fine. Tried a new .adx and...
Ok, so many of you may or may not know that i have installed a chevy 350 in a mazda miata with 2 eaton m90's strapped to it.
i have a 16196395 computer, moates g1 adapter, a N/A chip from mark,...
A local guy MIGHT be able to tune it...... however, before i do that i would like to run it on a rising rate FPR through a load to see if it going to throw this belt..... if not then ill take it to...
Which one would i purchase? The $430 or $380?
I have a bosch one from a saab/audi for each blower. When it hits boost; it closes
Does a free tune come with it ;)
How well would this work?
http://home.windstream.net/mcfly/tuning_fuel.htm
i have a wideband and i can get the aeromotive regulator. Intercooler is about to be ordered.
Sooooo out of my price range lol
Dead thread. PAH!
you got another thing comin.
http://youtu.be/QXcdwEEEiH0
anywho; dave, are you ready to tune this thing??
sorry i didn't tell you guys.
I have it all worked out to where a single belt will be used all driven by the crank. Problem fixed :D
I got rid of the passenger side tensioner, replaced with...
gotta love vegas :]
125 during summer, 50 during winter :]
well, i welded a "support bar" underneath the blower plates, got rid of 1 tensioner and replaced it with an idler to run a single belt...... painted it all up and put her in the car for a test fit.
...
can you edit the original in paint and show me what you mean by that?
the way that i see it, is too big of a gap for the supercharger span so another idler would be needed.
They are even. I can get a belt long enough to wrap around everything by adding 1 more idler, HOWEVER, it touches the waterpump twice. I don't know if that will cause any issues.
[See page 2 of...
you also gotta think, it's going in a miata so i gotta keep it as compact as possible. can't run my alternator on the lower passenger side of the block cause of my sway bar. I have to use a modified...
No idea.
These are the only pictures that i have to go off of.
...
Ok, about the single belt......
Can i run it like this without any problems? [comes in contact with the waterpump twice]
IF so, i can pick up another belt right now; all i would need to do is...
People said a single belt as more chances of failure..... that was the original plan :mad1:
here is how much faster the passenger is after 10 rotations...... would a 10% overdrive pulley on the...