Anyone?
Type: Posts; User: 78monte
Anyone?
This is after I smoothed then added the addr then smoothed again any suggestions im just trying to get a starting point being I havnt got the new ecm yet or the cables hardware I need
7953795379537953
Sorry im having problems with the pic
*20141012_121850.jpg*(95.9 KB)*Attachment*
*20141012_121850.jpg*(95.9 KB)*
Attachment*
How does this look
*20141012_121850.jpg*(95.9 KB)*
Attachment*
Does this look ok?
But how
It says to add the information from 've2 into ve1 then zero it out hoe do I add that information and do I add it to ve1 original or ve1 corrected
Theres should be someone that can tell me how to add thi to ve1 and witch on to add it to??
http://www.gearhead-efi.com/Fuel-Injection/attachment.php?attachmentid=7924&stc=1&d=1412873421 how do I combined the addr abd witch one do I add it too
someone knows ?
Ok went through the links read alot probably gonna have to do it a few times its still a lil much
Ok but how exactly do u do that and put address into corrected ve1
What's up with the 've" table? One old one new then one days add these values to 've1 but theres 2 and it did make sense on how to add the info
So as for the egr how do I eliminate it and the knock and vss someone told me to ground the park switch what the manual option do?
Thank u guys at first I just want to get it running for know to see how it runs so cutting out egr or knock someone told me about the p/n switch on the 7747 to not use the vss I've been working on...
Ok thank you
Thank you for your help im gonna download and see what I can figure out
Ok thank you
Ok so xdf and $42, the xdf the bin file? Im a lil confused about the ads xdf etc
When I started I didn't know about different ecm or pcm I have a 7727 and I was told it would be better to use a 7747 because I dont want vss or knock or egr I have 87'-88' tbi 350 with mils cam...
Seems to me my learning curve with this is gonna take awhile
What about the p/n switch?and what is the situation with these :ads?, Adx? , xdf?, xdl?
And which ones do i need
l
Ok im gonna work on the ecm and harness is there a how to on the park switch and then what mask and bin? I do appreciate all your help
But if u say it would be easier to get the 7747 I found one at local junk yard good price but should I get a harness of the same vehicle or will the one I have work I dont seem to understand why ! 88...