Search:

Type: Posts; User: Xnke

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. You will need to unplug your ABS computer to get...

    You will need to unplug your ABS computer to get good datalogs. You need to use the P66 ADX, and P66 XDF. You will need to get a program that can write the flash, I personally use Tunercats Winflash,...
  2. P66 V6 2-bar MAP code-Can't get the A/C to work correctly.

    So, all this time later after getting Robert and Charles's 2-bar map sensor code updates into the P66 codebase, I'm still fighting the A/C shutoff problem.

    Basically, as soon as the 50kpA...
  3. Thread: 93 V6 flash

    by Xnke
    Replies
    89
    Views
    57,203

    Remember too, the 93's are not the same PCM as...

    Remember too, the 93's are not the same PCM as the 94/95 PCMs. It uses specific programming, and while the Winflash OBDII tool will program it, the Tunerpro ADX will work, the XDF will NOT WORK with...
  4. Replies
    132
    Views
    209,958

    Now that the Allpro device is no longer...

    Now that the Allpro device is no longer available, what's the best device out there? OBDiag.net no longer sells that tool, apparently.
  5. Replies
    2
    Views
    2,328

    Here's FACTEST_1: F078 F078 ;...

    Here's FACTEST_1:

    F078
    F078 ; =============== S U B R O U T I N E =======================================
    F078
    F078 ; a factory test routine
    F078 ;...
  6. Replies
    2
    Views
    2,328

    First things first, the E-Side factory test...

    First things first, the E-Side factory test routines.

    here's the first one:

    F010
    F010 ; =============== S U B R O U T I N E =======================================
    F010
    F010...
  7. Replies
    2
    Views
    2,328

    P66 boost-prepared code fork anyone?

    So since I drive the truck daily right now, I am going to re-build the old bench test harness and set it up with the intent of starting to delete code. Stuff I don't need. It's time to fork this...
  8. Replies
    348
    Views
    314,608

    Got the Trimalyzer program working well, however...

    Got the Trimalyzer program working well, however I need to do some editing to the tables to get them sized and ranged appropriately. I am tempted to try and get it to tune based on the wideband...
  9. Replies
    9
    Views
    13,393

    The knock sensor is tuned based on the bore...

    The knock sensor is tuned based on the bore diameter of the engine. Thus, pick the engine with the bore diameter closest to yours.

    Untuned knock sensors are also out there, and will require a...
  10. Replies
    348
    Views
    314,608

    Man things have been rough with this lately. ...

    Man things have been rough with this lately.

    Bought the new laptop, then the garage flooded three weeks later and it got drowned. Just now got it repaired and took some datalogs today, found out...
  11. Replies
    9
    Views
    21,144

    It is not a data port, it is an analog filter...

    It is not a data port, it is an analog filter plus an amplifier, and an analog-to-digital converter.

    Same part is used on the 2.8/3.1/3.4L P66 PCM's. You have a P6-style computer, but it's got P66...
  12. Replies
    348
    Views
    314,608

    Been a long time since I fought this problem....

    Been a long time since I fought this problem. Haven't fixed it yet, and haven't done anything with the car all winter-the laptop died and I got laid off work. Now that I'm back at work, a new laptop...
  13. Try Corsa Technic for pins, and EFIHardware for...

    Try Corsa Technic for pins, and EFIHardware for the finned aluminum body connectors. Of course, EFIHardware has the pins too.
  14. Replies
    132
    Views
    209,958

    Any plans for a laptop-based app?

    Any plans for a laptop-based app?
  15. posts 18-20 explain why this was gonna be an...

    posts 18-20 explain why this was gonna be an issue, and how it was solved in the P66 code.
  16. Replies
    132
    Views
    209,958

    How's this going? Haven't heard from you in a...

    How's this going? Haven't heard from you in a while, Pete!
  17. Setting the baro to be equal to baro is not a bad...

    Setting the baro to be equal to baro is not a bad plan, but you just need to update that baro value on startup only. Once the baro value is worked out, next on the list is gonna be making sure the...
  18. It's been talked about in the $EE code for a long...

    It's been talked about in the $EE code for a long time, but something was in the way-I am not sure what it was. I know the RPM limit is hardcoded and would require a major code redesign if you wanted...
  19. Replies
    348
    Views
    314,608

    I'll send you the bins I'm using, I have a LOT of...

    I'll send you the bins I'm using, I have a LOT of them for these cars. All the ones Robert Sarr has listed on this site plus a few more. I'll grab them off my laptop along with a fresh pull of the...
  20. Replies
    348
    Views
    314,608

    I am using the orifice tube, without temperature...

    I am using the orifice tube, without temperature control. I have the flags set as per an L-body car, which also used the orifice tube. (at least I set them by putting the L-body bin in the compare...
  21. Replies
    348
    Views
    314,608

    So far, it hasn't seemed to have worked. I am...

    So far, it hasn't seemed to have worked. I am still doing some testing but setting bytes 819C and 891D to FF have not fixed it. It hasn't changed the issue at all, best I can tell.
  22. Baro updates, at least in the P66 codes, happen...

    Baro updates, at least in the P66 codes, happen at a maximum RPM that can be set, and 100% throttle. So for example, the factory settings for the 3.4L camaro is 4000RPM, so with the stock throttle...
  23. The baro update can happen any time the PCM would...

    The baro update can happen any time the PCM would normally do a baro update, regardless of 100kpA, but it will happen automatically at 100kpA. You need to disable that.

    How are you retarding your...
  24. Hope you don't have a 4L60E in there. The...

    Hope you don't have a 4L60E in there.

    The reason you can't do this with the 2-bar map isn't fueling. It's that EVERYTHING in the trans code relies and absolutely needs that 1 bar map sensor, or...
  25. Replies
    348
    Views
    314,608

    OK, so byte 819C is already in the XDF as the...

    OK, so byte 819C is already in the XDF as the "N/V (tach/speedometer vss) ratio to use WOT Disable", and the stock F-body bin it's 36, in the stock L-body bin it's 101. Byte 819D isn't defined in the...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4