I have been logging and looking at the injector pulse width readings to figure the duty cycle on them. I am using the latest DA2 files from this website. I have a 92 Corvette LT1 M6. Using the...

Thanks for your reply. Here is screenshots of my spark tables. When I look at them they seem rough compared to the VE tables. This maybe normal.

Greeting all,

Working on my timing tables, 92 Corvette LT1 using $DA2. I have made a few data logs. I have noticed spark retard in about the same RPM and load in each log. I have reviewed the logs...

Steveo,

I have made some of the changes you mentioned in your reply. I removed the throttle body and drilled a 1/8 inch hole into the idle passage. I also made a filler block to put into the two...

Thanks for your reply. The motor is not stock. I have installed a Comp Cams CC503 cam with 1.6 rocker arms, valve springs, retainers, push rods, new chain and gears, GM LS7 Lifters, Long tube...

Dave, Thanks for your reply. I will try and upload the files you asked for.

I am working with a 92 Corvette LT1 using $DA2 files. I have run a few data logs, and created a few history tables. I notice I have split in the BLM's from the left and right side. Not a big slit,...

Thanks! I guess I need to get busy, and see what I can do.

Thanks again Dave W.

Hello all,

I have been reading this forum for some time now. Looking over the TunerPro tutorials, and following along with my laptop. I have purchased the Moates AutoProm package and run a few...