Thank you! Yall r awesome!!
Type: Posts; User: BigBanks78
Thank you! Yall r awesome!!
Thank you! I dont have time to read much of that at the moment but looks interesting :)
I left a post in the obd1 forum but thought it may b a better bet to ask over here. I just installed a 2000 model HD3500 Intake on my 89 C3500 and a cant find the offset for the injectors. I'm using...
Ok so I really was trying to find this myself, I have found offsets before but I'm Missing something this time. I put a 2000 model gmc HD3500 intake manifold and injectors on an older model 454 in my...
I was watching the % on it so dont know what the voltage was. I had to close the throttle on it. May try that on my truck though
Merry Christmas and Happy New Year :thumbsup: so I guess it's still there but not near as bad or as often. Most times it idles at 900+-, every once in a while it will idle at 1000+- but stable and no...
Also..... I was trying to add a wideband thru the a/c pressure in the ADX. Is that possible with $8B?
I'll have to drive it a bit more to see if the idle stays down. seems like i have to drive this thing for a week or 2 before it learns the change or does whatever it does not to do odd things. I put...
Yea you're correct, that one is not adjustable. I replaced it, I seen the throttle land on 1.??% after an intermittent .39%.... Not sure if that really changed much for the idle. I did open the...
Yea I dont think its the coils either, settings may need to b adjusted a tad but not the issue. I checked everything again after lowering the steps for the fan cuz that did not work, so I adjusted...
I just seen this,( Low fan anticipate steps set at 5.) High fan in this bin is f7-coolant over heat light and is set at 0.00 anticipate steps. so when I set the low fan and stop useing the high fan...
I cant find a calibration table for Latency at all in $8B. I used the search tool, nothing and looked down the list, didnt c it. Is there another name for it? Im using ANMS HO 5speed
Oh and no latency anything. Maybe change spark bias table instead of the ones I did? Im feeling my way thru the dark on a lot of the bin.
ok I looked at the other bin, they r the same as far as i can tell. Same as in # of pid's i guess.. I slept sense then. I lowered the iac position temp offset vs cool temp and it responded in kind so...
Ha yea :mad1: Im not sure the exact model but I found a chart that said those coils were used from late 80's to mid late 2000's wasn't boosted in any way. i just looked at the supercharged bin cuz it...
Ok so I picked the one bad module out of several. Changed it this morning and that fixed the issue. I looked for the latency scaler and did not find anything labeled "latecy" in the bin. The bin im...
Hey everyone.
The stock Quad-4 coils r getting hard to find so thought I would try a couple 3.8l coils. I hooked em up and they work but the idle is high 1200rpm and its pulling the idle timing...
I grounded the wire and datastream displayed 303F while just unplugged it displays 32F. There r 4 options for coolant temp in the adx,2 400k and 2 348k. Im guees 1 set is for C and the other is...
Ok so I just picked a reply button at random.
I may have fixed the SES when warm. I was comparing 1988-91 wiring diagrams and f7 was the "high fan" in 88, f7 was nothing in 89 and the coolant...
Ok, I got to looking and that stuff would b an idiot light. So I been meaning to add some stuff I found but wont have time to type it all till after work in a couple hours....
I will try to find the deffinition but do u think code 15 coolant low is a low coolant level instead of low coolant temp? I do not have a coolant level sensor, not sure if there was one stock but...
I have many redundant grounds from past diagnosis but i will go thru the wiring. I recently switched from Code59 and the temp sensor worked fine. yea I know the ecm is setting the code and the adx is...
Hey,
I checked the ohms on 4 different sensors from 70F to about 220F, range was 3000 @ 70, 200 @ 220. The ohms climbed smooth with no spikes. this sensor is the same used on the 7427 and 90's...
I only have a code when the engine is less than 120F and the datastream says its 250F setting code 14. The code doesn't set after its warm. $8B as far as i know uses the same temp sensor as $0E (or...
I looked for the resistance specs when i bought the new sensor but figured it was a bad sensor based on passed experience so i didn't dig. New and old sensor both switch at the same temp, I will...