ecu went out. heres a log out the new ecu
Type: Posts; User: lilhupper
ecu went out. heres a log out the new ecu
here is one with a 160 stat.
a little hot in both these logs going to put a 160 stat in tomorrow
?????
Its an electric fan hooked to a toggle switch till my fan control is done. I did not turn the fan on In the log
Sorry 4 months this is that chip
This is the first log from the chip you sent 6 months ago.
it is the last chip you sent.
Ill check timing again and make sure its dead 0*
Sorry I forgot about the chip. Ill ive done is adjusted the air speed screw and tining like you told me to.
Fuel pressure is the same. I did change the chip. I have dont nothing but timing and ait speed screw
got truck timed to 0* and 1/4 turn on the air speed screw. truck feels good did have some problems with stalling but didnt seem to do it today. ill try to get a of of it soon
ok i havnt had time to mess with it yet ill try to this weekend just dropped 6 in of snow so no more driving logs for a while
ok sounds good ill get right on that
my cam is also 4* advanced
well the icm is a factory one came off a factory distributor. might be a little off on my timing last time i set it i had that idling problem
No egr and factory distibutor from orielys
ok got my new pump in seems to be running a little better got a data log with the cutting out when costing. the cutting out at cost was right around 5.40 min
ok hows my idle log looking?
Got a weird 5th gear problem at 60 MPH and 2200 Rome and let it coast. Then pull it out of gear it dies
my gauge says im at 15 psi but bleeds off under throttle
Well its the factory 2.5 l tbi pump i dont know if there any different from the 5.7 or not. Its got new an fuel line from the fiter up along with a new filter
I am also losing 2-3 psi of fuel pressure under a load not sure if that is something to be conserned about or not
i think it needs a 1/4 turn more.
was a bad starter. but ive been thinking about taking the tbi off and going with some kind of MPFI. are there any system that are better? i know tune port is fairly cheap and easy to swap but i dont...