Guys,

Today, we did some fiddling with the latest bin after which I decided to take a chance and drive the truck on a short jaunt on the streets and parking lot of the complex. This was the first...

Guys,

What is causing the ALDL connection to cut out intermittently, thus, we loose whatever data and info? Sometimes, the connection returns on its own but at other times, a shutdown and restart...

Hey Anthony,

Thanks for taking a look at the .bin and modding it. I will burn it to a PROM and give it a shot. I'm sure your changes will make a difference.

Glad the package arrived; I had been...

Dave W,

Our safety check program does not include emissions and “attempts” to ensure all vehicles can safely operate. Inspectors look at tire condition, braking function, lights, tint, mechanical...

Hey guys,

I'm trying to get my 4.3L S-10 setup in order to take it out of the shop. But before I can put it on the road, my truck has to pass Hawaii's auto safety check program. Consequently, I...

DaveW, thanks for the information. Rather than cutting the wires and isolating Pins A, B, and E via M location, I fashioned separate jumper wires to connect the ALDL to the AutoProm. I'm now able to...

Thanks for the offer, Anthony. If I remember correctly, my 8625 was from a '93 4.3L Sierra. Yes, it does have a memcal with .bin chip and netres.

Happy New Year, Anthony!

From all that I've read and am aware, 4288's are S_LL_OOO_WWWW at 160 baud. The difference in processing speeds between black connectors ECMs and red/blue PCMs was my...

Thanks DaveW. I hope you are right about my search being an easy one. Unfortunately, being in the middle of the Pacific, that sometimes may not be true.

Is the wiring actually different between...

Dave,

Am I correct to interpret your response to say there is no easy way to remove the retaining clip without damage? Okay. To ease my salvage yard adventures and search, are OBDI connectors...

Happy New Year to you Dave W!

Thank you for responding and providing the insight to using a scanner. The main reason I used connectors versus pulling and re-positioning the unused ALDL wires is I...

Back sometime ago, I asked a similar question and Dave W provided an answer which was to move ALDL wire from Pin E to Pin M. I recently did this by cutting the wire and attaching male and female...