New VE graph is fine for now. Don't worry about it. Given where you are, you have to use the KISS (Keep It Simple Stupid) principle and one thing at a time.
Nothing should be done until you get...
Type: Posts; User: 84Elky
New VE graph is fine for now. Don't worry about it. Given where you are, you have to use the KISS (Keep It Simple Stupid) principle and one thing at a time.
Nothing should be done until you get...
The wire from the sensor should be directly connected to Pin F9 at the ECM
5.7 knock sensor is correct and should have about 3900 ohms resistance (sensor to block).
Drew ---
If something mentioned here you already know, apologies. Just trying to be thorough.
Many issues, few of which can be determined by looking at a xdl log in TPro. This is the reason a...
These instructions apply to any $6E BIN with the WBo2 AFR patch (ARAP, APYP, etc.). Thanks to MikeT88IROC350 at ThirdGen.org for testing these changes.
When reporting of WBo2 AFR was added,...
Tks for update. I too have had cable issues, but replaced with a new one and all OK. Failing cable worked for years and all of a sudden started providing random data. Really weird. Had one pin with...
Yes, but you need to make a log first, while idling and running at various RPMs for a while, all in Closed Loop. Then post exported log .csv file and bin.
Just replace non-zero values with zeros and save it. However, might save-as so always have bin before and after changes. Applies to any changes you make. And keep written notes that accord with a bin...
One glitch is one too many. By any chance, are you using a ZIF socket in the ECM to connect the cable from the AutoProm? If so, Moates does not support that method of connection. It will work, but...
Yes, but apologies. What you are seeing in the pics is from the S_AUJP v7 XDF. Descriptions change among versions of XDF files. That's why the addresses of XDF items should be used and that's that I...
Difficult to read pics. I assume you want to zero the Low PW table. That would be the table in the left pic below.
Voltage offsets (right pic) should not be zeroed. Rather, see the info below if...
Zero is correct for $8d representation of 8 cyls. Here's the text from the S_AUJP v7 XDF:
VERY IMPORTANT: If changing this value from 8 cylinders (0), you must also change the entry at 0x293=ERROR...
Drew1992 --
Has this engine been running with an existing BIN or are you just beginning? If the latter, the BIN Dave provided is a good starting point. Spark may be a bit high for those heads and...
Long post so please bear with me. Many replace GM factory Multec injectors, and others, with Bosch IIIs (B3)s of various flow rates and worry because they don’t have B3 Low Pulse Width (PW) and...
Will need 2007 or higher.
Unfortunately this won't work Dave, but thanks for the post. Macros are not supported in the Web Office version. Grrr.
Thanks for the feedback. Yes, it will unfortunately not run on any of the open source platforms (discontinued OpenOffice, LibreOffice, NeoOffice, ApacheOffice, etc.). This is because of differences...
You can try it with OO, but it's not guaranteed to work because despite being an Excel clone, some operations have been reported as being different. But please try and report back. Also note that...
Attached is an updated Log Analyzer Quick Tuner program. Any .csv, .xls or .xlsx log file that contains BLM and INT with 128 as the base value is analyzed in just a few seconds, providing data to...
Hi Guys ---
Unable to upload a zip file regardless of size. Tried several times with different size files. Rebooted and still no luck.
Any ideas?
Thanks.
1Proj --
Agreed. Thanks for your suggestions. They along with others were considered during development, much like what was done in $12P with a staged shutdown if issues. But had to end somewhere to...
Unlikely to add anything. Looked at what GM did with the Buick GN turbo thinking using PWM for the solenoid would work by mirroring the CCP or EGR logic. But the GN is basically a somewhat dumb...
Revision 2 November 22, 2021
Provides:
C4 Corvette CCM Commands.ADX
For these cars, includes the CCM Commands that must be added to the S_AUJP ADX.
Updated ADX files to allow cars with...
OK, here's a solution but it's not elegant. I have simulated it to ensure it works. But CAUTION:
THIS SOLUTION ONLY APPLIES TO THE LATEST PRODUCTION RELEASE OF S_AUJP: S_AUJP v6-28.BIN...
If you are not proficient in assembly language programming and don't have the ability to assemble the code into a bin file, ti is not possible. Perhaps if you explained exactly how it is working now...