sorry to butt in but does anyone know whether the crank trigger should be set exactly tdc with a 1227730 ecm or should it be given some static advance

sorry I did not reply sooner but I got behind with the virus around.I built a tone wheel and because I am deleting my AC i trimmed my AC pulley off and welded the wheel in its place. this leaves the...

thanks 1project2many. that should be easy to adapt to my project.i will use tha as a basis for a wheel to mount on my balancer

thanks for the input.I have got all my ducks in a row now and will tackle the upgrades over the next few weeks and will post the outcome soon.

cool thanks for that.hope you have a good holiday. fiero bill

according to my calculations 2 degrees would only be .122 of an inch on a 7 " wheel or are my calculations incorrect ?

sorry the picture you posted is a big blurry blob on my pc.

nice job on that setup.my only question what are the dimentions of the slots in the wheel?i have no problem machining my own parts.it was suggested that i use a crank trigger from a mid 90's...

thanks for the info

thanks for that. i also found a set of drawings to cut the wheel directly into the balancer itself. i've got some time so theres no rush.i will try to pick the one that works for the skills i have.

thats what i thought. i will have to locate one that will fit my 2.8 block. i have a 3.1 crank in it but the block will not accept the factory magnetic pick up.

no i am upgrading to 1227730 ecu

hi i am in the process of changing my 85 fiero from distributor to coil pac and began thinking about whether i should be using a magnetic wheel or hall effect.i would think hall effect would be...