Bump, still available

Hey Rat Rod, I'll send you a direct message so we can figure something out.

Hello all!

I have a few parts required to datalog and burn PROMs that I want to sell—posting this to gauge interest. These parts were all purchased in September of last year to use with my TPI...

Yep, that was it! I had a second chip that I tried burning, with the same steps, and I was able to fire it up this morning. It's idling great and not throwing any codes.

Thank you for your help,...

Ok, so I did a bit more testing.

I removed the PROM altogether (left in the adapter and the piggybacked memcal) and ran the car and had the same symptoms. I also tried rewriting the PROM and...

Thanks for your response!

Removing the adapter and reinstalling the memcall does resolve the issue. The orientation is the same as the image you posted, but I'll review just to make sure.

I'm testing using tunerpro to stack the bin as well, and getting the exact same results.

I'm starting to wonder if the PROM is maybe backwards, but I've verified with pictures from boostednw that...

It's a 27SF512 PROM and the offsets are:

Buffer 0000-3FFF
Chip C000-FFFF

Thanks!

Here is a thought: do I need to do something with the checksum or Prom ID? I've read that I may need to set the Prom ID to aa to disable the prom checksum validation.

Hello all!

I'm new to PROM burning and could use some guidance. I have a 1987 Corvette with the 1227165 ECM I'm trying to use with a newly burnt PROM. I am using the BoostedNW GM1 Memory adapter...

Hello! I am new to tuning, but looking forward to learning.

I have a 1987 Corvette that I recently purchased to wrench on. I'd like to start learning how to datalog and would eventually like to be...