Search:

Type: Posts; User: dave w

Search: Search took 0.10 seconds.

  1. I've been wondering about the intake valve...

    I've been wondering about the intake valve clearances vs. bore diameter with the 283. Is it possible the 1.94 intake valve will interfere with the 3.875" bore diameter of the 283? I seem to...
  2. I'm thinking a 283 with 882 heads (about 76cc if...

    I'm thinking a 283 with 882 heads (about 76cc if I'm remembering correctly) will have a compression ratio that will be to low.

    dave w
  3. Back in the late 80's I helped build a budget /...

    Back in the late 80's I helped build a budget / non-fuel injected 283. For heads, we used early 80's 305 heads with 1.84" intake and 1.50" exhaust valves. The 283 had 1.72" intake valves and 1.50"...
  4. The 8625 PCM requires using a 4K resistance Knock...

    The 8625 PCM requires using a 4K resistance Knock Sensor. I agree with 1project2many, a knock sensor with a near identical bore, as long as the knock sensor measures 4K +/- a very small %.

    dave w
Results 1 to 4 of 4