I have some More questions,

The Decel enlean MAP and RPM Tresholds, what is their use?

When Enigine in Iddle Rise over 1000 RPM O2 goes lean,
MAP Threshold is set to 25.11 kpa
RPM Threshold...

Thanks for Information, but for Factory set is only Required to Disconect EST Module, then set to 0°BTC.

I Plan to set Timing 8° BTC becouse in my Spark Tabel is Max Advanced to 42° so with The...

Hi im a little confused about this ECM??

In Tuner Pro are diferent masks available, i try all them out, best i think was 61v3.xdf?
when i use 61V2.xdf and compare with the original bin (ANTT)...

Mechanikal problem is Solved, the fuel pump Stops Working some times, i put out the pump, and see the brushes was broken.
I put an other from a 94 Trans Sport in.
Now engine starts and run. I would...

Its not a stupid question, Vortec Engines needs longer one, i use RS14PYC6 Sparks.

about the burn Picture i dont now at the moment, before i tested the cam i Drive the car only 3 minutes in the...

Cam and setup is okay,
what are normal values for MAP at WOT?

At key on map reading is rund 98kpa, i have alredy cheked the sensors ( with vaccum gauge ) firing order is also checkt more than one time,
I look about the log the whole day, and i´l be thinking...

im using Tuner pro 5,and APU 1, Also Winaldl
I dont have mod the VE Tables, in the log file Engine runs very Rich, so in Closed Loop INT is always lower than 128
for me it seems a missadjusted Cam,...

Hi, I need a little Help
I have Setup a Stock 98 350 Vortec into a TBI Vehicle, using Performer Intake from GM.
ECM was 1228746 Running with modified ANLU.
also the 350 Stock Injektors on 13 psi...

Hi, i am doing actualy nearly the same, i have a 98 Vortec 350 implantated in a 89 Camaro ecm 1228746 i have the Same Problems, and search about to Fix..
Have you use the correct Sparks (the Vortec...

Hi Mike
i think its not from Opel, the car was imported from california 1992
i get the car in lots of boxes, in 1999 the engine was not working, and the pree owner disasembels the engine to find...

Hi all to gether im Andy from Austria
im new in EFI Tunig, and hopefull to learn a lot by you.
In my Country are a lot of US-Car fans, also some Cars are Available
but for Performance work all the...

Hi all gys
Im very new on EFI Tunig, and need some Ideas from you! Im Located in Austria, and here is no body available who have a plan about US-Cars with
EFI, on my Location all tuners put on a...