Thank you, I will look into scrounging that hardware, and then adjusting the software.

Alright! Winter is over! Time to go Jeepin' again!
I'm using Bill from Binder Planet's timing table from the FAQ. It seems to work well, I don't hear any knock, but I think further tuning of the...

Tuning is going well, still using the 1227747. Fuel tables are close. Starting to think about timing tables. With my big bolck system I have no knock sensor.

Bill over at binderplanet says "With...

I've been taking advantage of Bill's vast amount of knowledge over on binderplanet. But he appears to be on vacation or busy the last few days. Here are my questions from that site.

Here are my...

Looks like I posted the wrong log, that was before I applied the spark hack.

My injectors are 80PPH, with the BPW formula I came up with 107. Gas was running out the tailpipes, and I needed to...

Edit. Thinking of a different log

It runs!!

Im looking for the illusive ostrich2 instructions, searching different forums and sites, not finding what I need. I would like to data log and do real time changes. I had it working by...

Could someone please take a look the above bin I have uploaded, with all my information, and see if that seems like a good bin to start with. I have not turned the key yet, but getting close. I think...

I agree, thank you for your input. This critical Ignition component should be replaced.

I'll add it to the list ;)

Yeah, I saw the write up about grafting the 2 distributors together on Binderplanet. With all the talk on the internet about the distributor gear chewing up the cam, I thought I already have one that...

This site is an amazing resource! Thank you to all who post information for me to sift through!

Background...

TBI install on a ’78 CJ5 with AMC 360, .030 over, with Edelbrock Performer cam...

I've made a plywood prototype! I don't have a manifold to test it on right know, but it fits the TBI nicely! Aluminum model is in the works. About TBI placment, the Holley info says to put it in the...

Sorry, I can't figure out how to edit the title, it should say throttle body injection, TBI not tuned port injection TPI.

So in my studying information I've come across John Wilson's first printing, 03/03 "How to Build a GM EFI System." I hope this is a good source of information. I've been studying it for awhile. On...

THANKS DAVE!!!! Those will come in very handy as I try to make an adapter. I think that is the route I'm going, I'll make an adapter, and not use the "water doughnut", I think that's what I've...

That's all right, I thought someone offered the step file above. I can make the measurements and make my own.

PM sent

I'm putting a '87 7.4L TBI with the factory adapter on an amc 360, with Edelbrock Performer carb manifold.

Thanks

What do you think of just machining the bottom on the 7.4L adapter off flat, to aid in gasket sealing.?

A little help for the uneducated(me). I have been watching this for a wile, I have learned that my phone (Motorola DEFY XT556) will not do the "host USB" thing. My question…

If I get a cheep...

My donor TBIs came from a 1987 7.4L C20, w/auto, and another from a 1987 7.4L K30, w/auto.

Will this work for me?
Noid Light OTC7188 GM model 700 series TBI

...

The first swap will most likely be on the ’78 CJ5, 360, .030 over, with Edelbrock Performer cam and intake, stock exhaust manifolds(for now).
I was hoping to get familiar with TurnerPro RT on the...

This is the spot for that! A lot of information and helpful people! Where are you located?
John

Did this my self, but the message that I would assume told me to check the new email address and reconfirm flashed to fast for me to read it. This may not be the case, I may just a little slow, but...

Hello all!
A lot of good information, and knowledgeable people here! I am just getting started doing research for future carburetor to TBI swaps. I have what I hope are two complete TBI systems,...