Hey Steve, I really don't mind the tuning, in fact I enjoy trying to get the most out of this engine with the tune. You did the initial tune for me over a year ago when I first installed the engine...

No doubt ur right Shooter. I've looked at every elbow available and all have about the same radius. I searched the local U-Pull yards for something else with no joy. I could probably make a box style...

Thanks Ed. Yeah, that's the route I'm heading in. (see pics) I'm using a Flex-Lite 2700 CFM dual speed fan. My issue is the hood is hitting the sides of the radiator tank. Looks like I'm going to...

OK guys, I'm really struggling here trying to get plumbing set up to run a MAF on my 96 LT going into my 1939 Checy project. These cars 'pinch' really hard in the front making cooling and air intake...

Thanks Steve, I was able to do the first and last example. So, if the compare table comes up with all zero's then there is no difference in the 2 tables, right?
.

Hey Guys,
Can somebody tell me how I can view tables from different bin's side by side so I can see the difference in the tables? I've been trying to do it by loading the different bins with...

I got my injectors from these guys. Great prices and these people know what their doing.

Yea, I hadn't planned on messing with any of the tune till I'm more familiar with everything. I really can not wait till the knuckleheads in this club I belong to see, hear and feel this thing run....

Yeah, I have read most, if not all, of the parameter notes. Most make perfect sense, or I can piece it together looking at items that are referenced, but sometimes there are things that are confusing...

STEVE, In an effort to better understand the tuning process, what items in my tune can I play with (safely) while it's sitting here? Also, can you explain the theory, and your thought process, when...

Thanks Steve, for all your help. I greatly appreciate it. The body is still at the paint shop, but should be back to me by end of month. Still have to assemble and get the bugs worked out. Glad to...

Yeah, I reved it up a bit to get the 02's heated up, seemed to work. Still feels like it needs something, not sure what right now. When I rev it up, it jumps off of idle quick, like right now, no...

OK, I replaced the plugs and also put a knock sensor for a 95 PCM on it. Here is the log. After running the log, I pulled the plugs and they look really good. Whatcha think?? Why does it take so long...

Well, ya know I had to try it out--I'm a freak for the technology stuff. Nice job Steve, and something I haven't seen before.

BOT-TUNE
GREAT IDEA!!

Sorry, unless your talking about DFCO, not sure what that is. I'm sure Steve can explain.

Thanks Steve. Yeah, I picked up a new set of plugs last evening. I also pulled my 02s out last night an left them to soak in TECHRON. What would be considered a "normal" count for the IAC during,...

OK, loaded the original bin file with the exception that I changed Target Idle Speed to 900 rpm. After starting I reved the engine a bit because, even set at 900 rpm, it was still stumbling. Could be...

OK--I see.

I can tell you, as a bonafide NUBE, your documentation is much appreciated! However, because I was so new to it, most of the explanations were "over my head" as they referenced other tables, flags...

Very clear now. Thanks

Great, I'll reload the old tune and pull another log tomorrow.



Reminds me of a question that I had. I've seen the term "counts" used for several settings in the tune. Can you explain what is...

AHHHH- That makes sense. I set the throttle screw so the plates are just barely off their seat and left it there.

So--I thought I had an exhaust leak on the right, though I couldn't see where it...

GOT IT!! THANKS

Steve, thanks for the explaination. So those numbers are actual, re: that 1st cell number (8.0) is 8.0/1 AFR, less units of air per fuel unit making that a rich mixture?

OK, sorry if this is a very basic, or dumb, question. Working hard to further my learning curve on TunerPro and tuning in general. So, can someone explain what the numbers, in the cells of this...