I don't know. When I read a good article on here it says to uncheck the flag and tune using the base pulse width table. Because my car seems so close and WOT is done I am just going to play with the...

What do you mean by that? For me to adjust table 4 higher than 5 what would happen to the XDF file? The car was setting a high MAF code 33 but I then put the threshold all the way up.
Also, how do...

You are absolutely right. So if I do not uncheck the flag then playing with that base pulse width table is useless?
Here is the thing, at 3/4 throttle I am going lean, I adjusted the 4th MAF table...

So I finally tried richening up the base pulse width table with no success. I logged and just saw the Base Pulse Width number on the log where it was rich and just found that under the RPM's in the...

Hi all, feeling my car is very close but want to play around with the base pulse width table in 32b.
My question is: how does the computer determine INT and BLM numbers? Is it solely based on the...

Can anyone help me out on this? How can I find the LV8 number value so I know where to add fuel? And is it ok to play with this table with the the switch left on base pulse width calculation method...

Anyone know how to adjust this table?

Anyone?

How would I adjust base pulse width vs load? How do I know where to change it and by how much though?

Not for a while because I have the car in storage but what values are on that file? 32b is not very detailed at all.

How do I log LV8?

How do I go about adjusting this table when I don't see any LV8 values in my datalogs?

I have tried 6E but for some reason the car runs horrible when it's cold. I am very close to a good tune and don't want to start all over again. I just want to know how I adjust the base pulse width...

Posting a new thread again. I have an 86 Camaro and I'm close to having the car running good. I'm unsure how to adjust the base pulse width vs LV8 table using a 32B mask. How do I know where to...

That's a scalar. I have that to but I am talking about the Base Pulse Width table.

Hi everyone. I am still learning and have all the tools. I have the 86 Camaro with the ZZ4, 24lb Bosch 3 injectors and the TPIS mini ram. I learned how to play with the MAF tables but I'm still...

Nobody has a good definition file for $32b????

Anyone????

I got that concept now and I know how to adjust MAF tables but how do I adjust base pulse width vs load. How do I know where to add or subtract on that table?

can u post that file?
and is there anyway possible to get load while data logging? LV8 I believe it is called?

how do I go about adjusting the base pulse width table? How do I know where to add or subtract fuel???

Nobody?
:-(

Are there any good definition files for 32b?

Hi everyone. I'm looking for a detailed 32b definition file. How can I tune a $32b bin when there is such little detail in the logs with the definition file in tunerpro. Does anyone have a custom one...

Ok, anyways, I want to try to adjust base pulse width vs load but how do I go about that when I don't have any load value in my log in my definition file for $32B?