I fear my clarification was not good enough.
I originally ran this 95 4.3 tbi with a computer from automatic gm minivan (the number of which escapes me right now) and a harness from painless. I...
Type: Posts; User: ironwill11
I fear my clarification was not good enough.
I originally ran this 95 4.3 tbi with a computer from automatic gm minivan (the number of which escapes me right now) and a harness from painless. I...
No my request is not for info about a megasquirt system. If you have useful megasquirt info, I will gladly take it as I believe in always learning. What I am asking for is advice about tbi system...
Hello,
not sure if anyone here can give some helpful insight.
I have a 95 4.3 tbi with manual trans. I spent years trying to figure out it’s idle hunt. Unfortunately I didn’t figure it out...
Hello,
Can anyone answer some questions about TBI injectors. I bought an engine from an junk yard and the injectors on it are labeled:
5235209 on both,
then one of them has 0135...
Hello everyone,
Did not get a lot of work done due to a nasty sinus infection, but it gave me time to think.
Since there is very little information on getting started with megasquirt, I have...
skandolis,
I am not sure if the idle problem is in the tune. The idle used to hunt prior to megasquirt. The folks at diyautotune told me it megasquirt would help me out. The MS does try to run...
myburb,
Thanks for the info. I have the hei 8 module. My engine does not have degrees of advance on the timing belt cover. It only has the one slot to line up.
My biggest problem with...
Sorry to read about your key board ony. Not sure if my typing would be readable if my delete button did not work. Thank you for the effort.
Tried some new stuff tonight and got some...
Thanks,
I figured out how to read your bin in tunerpro. To be honest with you it left me a little astonished. Either I am not correct on how I am reading the table or your numbers are way off...
Awesome thanks for the info, I am now learning how to use tuner pro so I can open it and see it. What would I use to connect my ecm to my computer to use tuner pro?
Thanks for the response and clear information.
No I have not checked out tunerprort yet. I just found this site today.
My engine is from a 95 s-10 blazer (or so I am told from the junk yard I...
Hello,
I have a 95 4.3 TBI engine with a 01227747 that for a very long time have had an idle hunting problem. After years of research I couldn't find a solution to straighten out the idle. ...